Msd LAUNCHMASTER

[djslawn1]

JUST purchased a launchmaster instructions tell me to connect to clutch pedal switch using blue/red wire but my 2008 has 1white and 1 black wire and do not know which one to tap into to ground.let me know if anyone has overcome this problem thanks

 

[DarkFireGT]

I didn't tap into the stock switches. If I remember correctly, if you do that, you will lose the automatic cruise cancel when the clutch is pressed. Here's my install write-up:
S197 Ford Mustang MSD Launch Master Install | StangNet

 

[djslawn1]

i was in the wrong harness the color coding is blue/yellow wire on the lower clutch switch i was looking at the upper clutch switch.i am gonna put a toggle switch in the negative ground wire so i can have it work only when the toggle is activated.thanks for the info.