• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

MUSTANG GTS VS NISSAN 350Z Top Speed?

  • Thread starter Thread starter Afastgts95
  • Start date Start date Apr 19, 2004
Status
Not open for further replies.

Afastgts95

New Member
Mar 11, 2004
50
0
0
Apr 19, 2004
#1
  • Apr 19, 2004
  • #1
I raced a 350z this weekend and i got him off the line and had him by a car length until third gear he started coming back real slow until I got to top of third held him and shifted to fourth and he started coming up a little and then we hit traffic. I'm not shure if I would have beat him or not I had three passengers he had none. I am going to purchase gears but im stuck between 373 and 410 i have a five speed and Im going to purchase nitto DRs. I've read on other post that 410s accelerate faster but i've also read that 373s pull harder on interstate or higher speeds. W/My stock 273 gears I have no pull in fifth gear I/ve had a mustang previously with 373s and fifth gear was better but still not like my buddies M3 . do 410s give me that fifth gear? Why would 373s pull harder than 410s at higher speeds unless 410s are topped out? I like racing from a 50mph roll rather than from a stop so I want the gears that will give me the most power from 50mph! Any Help???????? I need to beat my buddies (track edition) 350z (6 speed,lighter). The one i raced this weekened was probably atomatic.
 

TrueBlue95GT

Member
Sep 29, 2003
966
0
16
41
Connecticut
Apr 19, 2004
#2
  • Apr 19, 2004
  • #2
Get some 3.55's. You lose torque around 4000rpms and thats where the 4.10's are around 80mph.
 
5

5.0dominates

New Member
Mar 15, 2004
29
0
0
West Covina, CA
Apr 19, 2004
#3
  • Apr 19, 2004
  • #3
destroy that piss of **** 350z!!!!!!!!!!
 

Silver95Stint

New Member
Oct 28, 2003
350
0
0
England
Apr 19, 2004
#4
  • Apr 19, 2004
  • #4
That 350z is pretty sweet, be careful and don't sleep on him. I would go with the 3.73's personally. I pushed my car one night with the 3.73's in them till about 125 or so racing an Acura 3.2 on the Interstate, so unless you plan on going 135 or so I would recommend them.
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Apr 19, 2004
#5
  • Apr 19, 2004
  • #5
definitely go 3.73s or higher numerically.
4.10s will pull harder in 5th with your low powered car.

3.90s would be a nice medium if you are frightened by the 4.10s
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Apr 19, 2004
#6
  • Apr 19, 2004
  • #6
My car tops out at 122mph. 5th gear @ about 4200rpm with 3.73. It just stops pulling and stays at speed. Weird!!??
 

go-stang5.0

New Member
Jan 27, 2003
2,244
0
0
42
Glenview,Il
Apr 19, 2004
#7
  • Apr 19, 2004
  • #7
THats because your mostly stock JJ. Our stock motors peak out at around 4K and drops of really fast. YOur running out of hp. Afast, I would recommend 3.55's like me, if you do any reasonable amount of street driving. Actually I run on street tires most of the time so I would like to have like 3.08's or something. But then again your mostly stock I'm not so...I guess it will depend on where you go with your car. Personally I think 3.55's are a happy medium. Good for stock thru highly modified. ANd still perfectly streetable. I drive my car in rush hour traffic in downtown chicago several times a week and its not bad. Hell, on nice days I even deliver pizzas with it. Lemme tell ya, you wouldent want 4.10's delivering pizzas in downtown.

Anyways, not to say your delivering pizzas or anything. But just trying to prove a point on how livable the 3.55's are.
 

StangJonGT

Founding Member
Jun 2, 2001
1,329
0
36
44
Seattle
Apr 19, 2004
#8
  • Apr 19, 2004
  • #8
I can't believe somebody delivers pizza in a Mustang GT.


Jon
 

Afastgts95

New Member
Mar 11, 2004
50
0
0
Apr 20, 2004
#9
  • Apr 20, 2004
  • #9
I bought 355 gears and will install them. I will let you know how the race with the track 350z goes.
 

95stocker

New Member
Mar 25, 2003
236
0
0
Rochester
stangnet.cardomain.com
Apr 20, 2004
#10
  • Apr 20, 2004
  • #10
JJ95GTID said:
My car tops out at 122mph. 5th gear @ about 4200rpm with 3.73. It just stops pulling and stays at speed. Weird!!??
Click to expand...

That is weird. You shouldn't be topping out at 4200rmp's. I would think you'd stop pulling a little higher than that. I'm putting 3.73's in my car as soon as I get the money to have them installed or the balls to do it myself. I want some more acceleration, and I gotta keep myself out of trouble on the highway (160mph cruise down RT80). So I guess when mine go on I'll find out if mine stops pulling at the same RPM
 

NIN

New Member
Dec 4, 2002
452
0
0
43
moorhead MN
Apr 20, 2004
#11
  • Apr 20, 2004
  • #11
When I had just a full exhuast and 3.55's mine pulled to 120 easy and then for some reason the check engine light came on. she might of made it to 130-150. I heard our cars stock make it to 150, with everything in premo condition.

What might cause the engine light, anyone.
 
9

94whtGT

New Member
Apr 20, 2004
7
0
0
Apr 20, 2004
#12
  • Apr 20, 2004
  • #12
I have 3.55's in my car and it is pretty much stock. I took on an Acura RSX type S on the freeway. I had my car up to 145mph and was pretty much staying ahead of it. The 3.55's pull nice for me in fourth gear at high speeds. Unless your engine revs high and pulls in those high rpm's, there is not much sense getting 3.73's or 4.10's if you are going to be doing high speed racing.
 

StangJonGT

Founding Member
Jun 2, 2001
1,329
0
36
44
Seattle
Apr 20, 2004
#13
  • Apr 20, 2004
  • #13
95stocker said:
That is weird. You shouldn't be topping out at 4200rmp's. I would think you'd stop pulling a little higher than that. I'm putting 3.73's in my car as soon as I get the money to have them installed or the balls to do it myself. I want some more acceleration, and I gotta keep myself out of trouble on the highway (160mph cruise down RT80). So I guess when mine go on I'll find out if mine stops pulling at the same RPM
Click to expand...


That is the best sounding Magnaflow exhaust I have heard. What are your mods?


Jon
 
L

levane33

New Member
Oct 18, 2006
1
0
0
Oct 18, 2006
#14
  • Oct 18, 2006
  • #14
top speed

Afastgts95 said:
I raced a 350z this weekend and i got him off the line and had him by a car length until third gear he started coming back real slow until I got to top of third held him and shifted to fourth and he started coming up a little and then we hit traffic. I'm not shure if I would have beat him or not I had three passengers he had none. I am going to purchase gears but im stuck between 373 and 410 i have a five speed and Im going to purchase nitto DRs. I've read on other post that 410s accelerate faster but i've also read that 373s pull harder on interstate or higher speeds. W/My stock 273 gears I have no pull in fifth gear I/ve had a mustang previously with 373s and fifth gear was better but still not like my buddies M3 . do 410s give me that fifth gear? Why would 373s pull harder than 410s at higher speeds unless 410s are topped out? I like racing from a 50mph roll rather than from a stop so I want the gears that will give me the most power from 50mph! Any Help???????? I need to beat my buddies (track edition) 350z (6 speed,lighter). The one i raced this weekened was probably atomatic.
Click to expand...
dont try it with that stang,i have a 350z also i got 165 with both windows down and more pedal to go.
 

StangJonGT

Founding Member
Jun 2, 2001
1,329
0
36
44
Seattle
Oct 18, 2006
#15
  • Oct 18, 2006
  • #15
That's just ridiculous. Take your hyperbole elsewhere.
 
C

cbarr300

Member
Jun 6, 2006
746
0
17
goose creek, SC
Oct 18, 2006
#16
  • Oct 18, 2006
  • #16
well...I'm not gonna say u'll romp the guy or nething....but with the right gearing it'll def. be closer....it also helps if ur a good driver.

I love taking the stang out and completely killing all these high dollar cars....rather fun...especially guys with run of the mill vettes (haven't come across any special ones). Save some money up and do H/C/I or a supercharger or....u can always give it some giggle gas....nice and cheap(er)...that's when u really start to appreciate that lil ol v8.

as for ur gear issue...I think 3.55s would do u rather nicely. I'm happy with my 3:73s..great driveability and better acceleration.
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
55
Boca Raton, Florida
www.mustangworks.com
Oct 18, 2006
#17
  • Oct 18, 2006
  • #17
Please no street racing threads in the forums. Especially 165 on the street.
 
Status
Not open for further replies.

Similar threads

T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
651
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
HP woes with Sniper Sytem
  • Stang_1973
  • Mar 10, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
877
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 13, 2025
revhead347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
924
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?