Mustang Stalling

dbdragracing

Member
Dec 1, 2004
397
2
18
I have noticed latley that my '89 GT will start and immediately die. I noticed if I held the key in the on position it would keep running, but as soon as I let it go it would turn back about 1/8 inch and die. What do I need to replace to fix this? Also the ignition module right below the key, I think it needs to be replaced to get my turn signals working again...is this just a plug and play install or do I need to program it? Thanks.
 
The ignition switch is the likely culprit. It will also affect the turn signals.

There is a FREE recall on Ford ignition switches. They overheat and sometimes catch fire.

Copy down you VIN number and call the Ford dealer nearest you. Tell them you want to see if the ignition switch recall for Fords & Mustangs was done on your car. They will ask for the VIN number & check it against the master database. If it isn't in the datbase, then you can schedule an appointment to have the switch replaced for free. The TSB is #95S28, and don't let them tell you that they don't do that anymore...