When doing this kit, or any other clutch cable kit conversion, do you keep the assist spring? Is there anything else spring wise that changes?
-Shaun
-Shaun
66P51GT said:Mustang Steve was very responsive to all of my questions. I'm sure he will be able to answer whatever concerns you.
Himark said:I have bought the ron morris kit and sent it back as fast as I opened it. The Mustang steve is the best kit on the market IMOP... Two things you will find helpful. One is use a 95 mustang cable as it is longer and will go in front of headers then under. Two, When using a hammer to push up bottom of vent cowl to clear, I used a air hammer. Much easier.
You need to take the pedal out to replace bushings and get rid of those big springs anyway when converting to cable operation.
meganjoe said:i also used the mustang steve set up ..yes the air hammer works great with a blunt tip..if your careful you will not break through the cowl..i eliminated the return spring..