• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Mustangs 101 - Totally basic question

  • Thread starter Thread starter cason234
  • Start date Start date Dec 26, 2010
C

cason234

New Member
Apr 20, 2010
4
0
0
Dec 26, 2010
#1
  • Dec 26, 2010
  • #1
Hello Mustang Fans - greetings from a lurker (I don't think I've ever posted here, though I've been a member of Stangnet for a while)....

My question is pretty basic, and pertains to the 99-04 Mustang GT..... I've never been in one, but I love the looks of it, and as I consider my next car, this vehicle is one of the front runners, but I want to get a sense of what kind of performance I can expect. About 10 years ago, I owned a 1990 LX 5.0 Mustang that I modified a bit (Eibach Springs, Tokico Shocks / Struts, 3.73 gears, BBK headers, Hurst Shifter, and that's about it).... I thought the performance on that car was pretty sweet. I moved from there to bigger cars (a Chevy Caprice with the LT1, 4.10 gears, lots of suspension mods, and now I'm driving a Cadillac Fleetwood with LT1, 4.10 gears, massive swaybars, exhaust and suspension mods etc). Anyways, I've always believed the maxim that there's no replacement for displacement. Would the performance from a 4.6 V8 in the early 2000's GT Mustangs (with aftermarket exhaust and intake, as well as gears) be comparable to what I experienced with my 5.0 LX? If it is, that'd be great. I'm not expecting "new Corvette beating" performance, but the ability to feel that wonderful rush of acceleration available only to V8 powered cars, as well as the 'tossability' of rear wheel drive and a tight posi rear end..... Can't help but love it!

Please advise what the comparison with my pretty basic 5.0 Mustang would be like.

Thanks in advance!
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Dec 26, 2010
#2
  • Dec 26, 2010
  • #2
While the 4.6 has a little bit less torque down below 3000 than a 5.0 has, the 4.6 is all over a 5.0 up top. A PI GT (i.e. 99-04) will be a good bit quicker than a mostly stock 5.0 (265 hp stock vs 215 stock). Intake, exhaust, gears, and a tuner on the 99-04 will make it pretty difficult for a 5.0 to catch up without a good amount of work.

If you are looking for a good looking, reliable, fun, cheap car to drive, a 99-04 GT is a great choice.
 

slayerripkdc

15 Year Member
Jun 3, 2003
1,341
16
59
brewster ny
Dec 26, 2010
#3
  • Dec 26, 2010
  • #3
I have owned plenty of the fox body 5.0 cars. The 99-04 PI 4.6 creates its 300lb of torque at 4k rpm versus 3k rpm in the older 5.0's. That being said the 4.6 PI cars overall pull better through out the rpm range. Get a set of gears (4.10's) and that will put you close to the low end torque department of the 5 ohs. Install an off road mid pipe and you should be about 4 mph quicker in the 1/4 mile , correct me if im wrong.

Usually H/C/I 5.0s put down a little more than 300 to the wheels with some good parts.
Same goes for vortec applicatons.

PI 4.6 H/C can see a little less then 400 to the wheels with some quality parts.
You can also see over 400 easily when going forced induction depending on your application of choice.

Overall PI 4.6 is a better runner.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Dec 26, 2010
#4
  • Dec 26, 2010
  • #4
Stock for stock, a PI 4.6 will yank any stock 5.0 car out of the water. The closest it would get is a low-option 5.0 coupe, 5 speed, with a 3.27 gear... but only because of the weight advantage.

I ran a 94/95 GT a few weeks ago and the difference was just silly.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Dec 26, 2010
#5
  • Dec 26, 2010
  • #5
I owned a 03 gt for 5 years...as well as owning my 88 lx 5.0l.....


Stock vs stock, the 4.6l does everything better, rides better, less rattles, nice smooth power band. You just need to learn to rev the engine a little higher than a 5.0. It will "feel" slower, but rest assured it is not.

I banged out a 14.1 with my 03gt bone stock. My 5.0 was slightly slower at 14.5. (of course modded..it was faster than my gt was ) )
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Dec 26, 2010
#6
  • Dec 26, 2010
  • #6
My bolt on 5.0 is a real joy to bump around town in, my 99 feels really heavy and lazy. However, once I get into the upper RPM ranges the 99 pulls like a train, where as the 5.0 is running out of breath (5200 red line opposed to a 6800 red line). I've never driven a regular 99-04GT, but I imagine they feel pretty similar.
 
D

Deleted member 38176

Dec 26, 2010
#7
  • Dec 26, 2010
  • #7
A completely bone stock 99-04 GT would walk your modded Fox pretty badly. Just some food for thought.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Dec 26, 2010
#8
  • Dec 26, 2010
  • #8
LarsD said:
My bolt on 5.0 is a real joy to bump around town in, my 99 feels really heavy and lazy. However, once I get into the upper RPM ranges the 99 pulls like a train, where as the 5.0 is running out of breath (5200 red line opposed to a 6800 red line). I've never driven a regular 99-04GT, but I imagine they feel pretty similar.
Click to expand...

Below 3500 a GT is MUCH MUCH faster, and has a lot more torque. 4 valves make absolutely no torque down low, but pull like raped ape up top. My granddad's Mach 1 will barely brake the tires loose, but once it does and gets into the powerband, it really rolls. Supposedly, Mach 1s have more low end torque than Cobras, so I suspect the difference between a GT and Cobra would be even more.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Dec 26, 2010
#9
  • Dec 26, 2010
  • #9
sneaky98gt said:
Below 3500 a GT is MUCH MUCH faster, and has a lot more torque. 4 valves make absolutely no torque down low, but pull like raped ape up top. My granddad's Mach 1 will barely brake the tires loose, but once it does and gets into the powerband, it really rolls. Supposedly, Mach 1s have more low end torque than Cobras, so I suspect the difference between a GT and Cobra would be even more.
Click to expand...

That is what I suspected, my Cobra even with 4.10's is so weak on the bottom end it isn't even funny. Get it above 4K and watch out though. I have long tubes on it also, and I'm sure that ate up some bottom end too.
 
C

cason234

New Member
Apr 20, 2010
4
0
0
Dec 27, 2010
#10
  • Dec 27, 2010
  • #10
Thanks for the input

Hi guys - I sure appreciate the input! Many thanks for your responses. I'm going to place the 99-04 GT on the top of my list!
 
You must log in or register to reply here.

Similar threads

W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
313
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
487
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
S
Mustang questions…
  • sox2005
  • Dec 8, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
304
2015 - 2023 (S550) Mustang -General/Talk Dec 8, 2025
sox2005
S
D
Will 2023 (Non-Handling Pack) Mach 1 Wheels Fit A 2013 Mustang GT OK?
  • dmw_4814
  • Oct 27, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
117
2010 - 2014 Specific Tech Oct 27, 2026
dmw_4814
D
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
908
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?