My 1999 GT... with a snake's heart

1991notchbackLX · Nov 26, 2009

Hey guys, I'm just starting to post in this section. I spend the majority of my time in 5.0 Talk, but I'll be hanging out in here more often now that I just sold off my 1991 notchback and got into this 1999 GT. Some of you may recognize me from seeing me posting around. Please check out the car and give me any and all advice/thoughts/comments/criticisms.

My plans for this car include a KB or Whipple, larger injectors/MAF and tune and whatever fuel system upgrades will be necessary. I'll also do terminator side skirts and front and rear bumpers, with the "COBRA" lettering filled in in the back, of course. I'm not into clones. My power goal for the car is 550/550 or somewhere in that range, without touching the stock long block.

Mods:
-1999 Mustang GT (35th anniversary, but who cares)
-2003 Terminator motor swap with 17k miles
-Amazon 3.0" inch pulley
-UPR auxilliary pulley (tensioner)
-Art Carr C4 tranny and converter, 4000 stall with reverse manual valve body and trans brake
-SFI flex plate and bellhousing
-455hp/457tq (on a safe 93 octane tune, 12.5 lbs of boost)
-QA1 Tubular K-Member
-Manual steering rack
-Complete Mach 1 brake swap
-Mach 1 Grill Delete
-Eibach Drag Springs
-Lakewood 90/10 struts and 50/50 shocks
-air intake shield with velocity filter
-Subframe connectors (bolted and welded)
-A/C delete
-Mishimoto aluminum radiator (2 row/3 core)
-LFP dual-bipass heat exchanger
-big aluminum expansion tank (black powder coated)
-custom aluminum driveshaft
-UPR upper and lower control arms
-solid rear axle w/31 spline and 3:73 gears
-MAC Prochamber w/MAC catback and 3" chrome tips
-Braille lightweight race battery (17 lbs)
-Procar Scat racing seats
-Cobra R 3" fiberglass hood
-Cobra trunk lid
-black Saleen replicas (87-93 style) 17x9 w/Nitto 255/45/17 and 17x10 with M&H 325/45/17
drag radials

car went 11.20 @ 124 mph spinning through 1st and half way through 2nd

Pics:

Opinions welcome. Thanks guys!!

Chris

deftsound · Nov 26, 2009

Very nice and clean! Some aftermarket smoked or clear headlights would look good...

IICrazy · Nov 26, 2009

Looks awesome and fast

1991notchbackLX · Nov 26, 2009

deftsound said:
Very nice and clean! Some aftermarket smoked or clear headlights would look good...

Thanks!! I have plans for some smoked headlights and sequential tails.

IICrazy said:
Looks awesome and fast

Thank you! It is definitely the quickest car I have ever been in. With all of the weight reduction is has all of the horsepower of a pulied termi, but a great many pounds lighter. It dead hooks with the SRA and DRs and tracks very straight even when it spins. I'm glad it doesn't have the IRS, honestly. It's set up very well.

Gearbanger 101 · Nov 26, 2009

Nice.....It looks fast, even sitting still.

98COBRA281 · Nov 26, 2009

wow!!! sweet, ive read your sig, but didnt know it was a termi motor, thats a hell of a rear tire!!!! it looks huge, i love it!

1991notchbackLX · Nov 26, 2009

Gearbanger 101 said:
Nice.....It looks fast, even sitting still.

Thanks Brian! I could really use your expertise when I start making my list of parts to hit my new HP goal. Keep your eye out.

98COBRA281 said:
wow!!! sweet, ive read your sig, but didnt know it was a termi motor, thats a hell of a rear tire!!!! it looks huge, i love it!

Thanks buddy, yeah the M&H DRs are 325s and they're HUGE, haha. They rub a bit on tight turns and sling rocks like a mother F'er, but I must say, they hook extremely well. Street race guys have been swearing by the M&Hs for years over the M/T ET streets, and now I know why.

scupking · Nov 26, 2009

That is awesome

95.0Stang · Nov 26, 2009

1991notchbackLX, I want a hood like that. How does it fit? does it close like factory?

SteedaGT9150 · Nov 26, 2009

Brute03 · Nov 27, 2009

that is absolutely badass! i think you should forget about the full cobra treatment for the exterior, the sleeper effect you have going is crazy. some smoked headlights and a chin spoiler would really set it off though

1991notchbackLX · Nov 27, 2009

95.0Stang said:
1991notchbackLX, I want a hood like that. How does it fit? does it close like factory?

The hood fits extremely well. It's a Cervinis. It latches just like factory but I'm going to get some hood pins anyway just for peace of mind.

scupking said:
That is awesome

Thanks!

Brute03 said:
that is absolutely badass! i think you should forget about the full cobra treatment for the exterior, the sleeper effect you have going is crazy. some smoked headlights and a chin spoiler would really set it off though

I've been tossing around what I want to do with the exterior of the car for a while now, actually. We'll see what route I end up taking once I get the car to the horsepower level I want. Go fast parts come first, of course, hahah.

BurningRubber · Nov 27, 2009

Man, you are going to ruin a lot of peoples day at the track...

Sick build man, I bet it is a blast to drive.

ItsStock02 · Nov 27, 2009

What was needed to swap in the terminator engine?

kalvick · Nov 28, 2009

It looks like you only have a gas pedal in that last pic. I take it that you dont ever stop and you are an avid believer of power shifting

<- *extremely jealous*

1991notchbackLX · Nov 29, 2009

BurningRubber said:
Man, you are going to ruin a lot of peoples day at the track...

Sick build man, I bet it is a blast to drive.

haha, thanks! It sure is fun seeing the look on people's faces...

ItsStock02 said:
What was needed to swap in the terminator engine?

I'm not sure exactly what you're asking, but the entire drivetrain, computer, harness, and fuel system from the Cobra was swapped into this car along with a bigger intercooler and heat exchanger and some other upgrades/weight reductions. A complete brake system from a Mach 1 was also installed. The original T56 was swapped out for the built Art Carr C4 that's currently in the car.

kalvick said:
It looks like you only have a gas pedal in that last pic. I take it that you dont ever stop and you are an avid believer of power shifting

<- *extremely jealous*

Haha, the steering wheel is blocking it, but who needs to stop anyway??

TOOLOW91 · Nov 29, 2009

sooo so so so so sick... if i could suggest a appearence modification, have a body shop sand the mirrors smooth and color match them.. i did mine and i love it my car is the same color

EPIK · Nov 29, 2009

Glad to see you finally made it over here to the 4.6 section Chris. I knew once you got that badass car, it was only a matter of until you made the jump from the 5.0 section.... How is everything?

1991notchbackLX · Nov 30, 2009

EPIK said:
Glad to see you finally made it over here to the 4.6 section Chris. I knew once you got that badass car, it was only a matter of until you made the jump from the 5.0 section.... How is everything?

Hey Dustin! Thanks for the compliment on the car. Everything is great by me, finishing up grad school and interviewing for jobs, just got a new girlfriend who's a keeper, no complaints out of me! How about you? How's the sunshine state treating you?

SteedaGT9150 · Dec 1, 2009

notchback are those corbeaus in there? im really contemplating picking up a set for my car instead of some black saleens.

My 1999 GT... with a snake's heart

1991notchbackLX

Active Member

deftsound

Please ask me how much my supercharger cost

IICrazy

taken away

1991notchbackLX

Active Member

Gearbanger 101

Straight Outta Locash

98COBRA281

1991notchbackLX

Active Member

scupking

Active Member

95.0Stang

Member

SteedaGT9150

Advanced Member

Brute03

Member

1991notchbackLX

Active Member

BurningRubber

ItsStock02

Member

kalvick

1991notchbackLX

Active Member

TOOLOW91

If you're the village idiot what's that make me?

EPIK

Member

1991notchbackLX

Active Member

SteedaGT9150

Advanced Member

Similar threads

My 1999 GT... with a snake's heart

Active Member

Please ask me how much my supercharger cost

taken away

Active Member

Straight Outta Locash

Active Member

Active Member

Member

Advanced Member

Member

Active Member

Member

Active Member

If you're the village idiot what's that make me?

Member

Active Member

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency