• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

My 89 Lx Project

  • Thread starter Thread starter SwampDog35
  • Start date Start date Jul 18, 2017
S

SwampDog35

Member
Jul 10, 2017
8
7
13
Jul 18, 2017
#1
  • Jul 18, 2017
  • #1
I've recently purchased a pretty decent car. The guy before me had great intentions as so it appears.
After a few cruise nights at local clubs and a few trips around our area. I think its time to start my own vision of my car.

Here are a few pictures of it currently.

First and Foremost is to get the A/C fixed. Living here in Southeast Louisiana is BRUTAL without it during the summer.

Everything he did below:
Car has a BBK X Pipe to Jones Full Boar exhaust installed.
3.73 Gears
Drake Diff cover
Pro 5.0 Short Shifter
Stage 2 Ram Clutch
New Front and Rear Brakes and Pads
Upper and lower control Arms
Sub-Frame Connectors
Rear Upper and lower sway bars
Front Lower and Upper sway bars
New Struts and Shocks
SVE Performance Springs
Saleen Rims (Front and Rear)
 
Reactions: Nutty 5.o
S

SwampDog35

Member
Jul 10, 2017
8
7
13
Jul 18, 2017
#2
  • Jul 18, 2017
  • #2
Start of my list are:

Fix the AC with a 134A swap.
Fix a small leak towards the rear end (Hopefully just a gasket issue)
Fix the Hood Latch
Replace the Seat Belts
Replace the Trim that appears worn
Fix and Repair the Sunroof (PlastiDiped coating)
Replace the Shocks and Struts with something a little more stiff (I'm a big boy)
Install below items to give it a little more pep:
Parts given with the purchase of the car not installed are:
BBK Shorty Headers
BBK 70mm Throttle Body
Under-Drive Pulleys

Any and all advice are fully acceptable for suggestions on installing any of the parts above. Because I'm not sure if I should install them or not without affecting anything else.

My wife and I just want a reliable car to cruise to Cruise nights and Car shows around our area.
Long term would be to upgrade the HP, but not at this time.

Thanks to all that offer suggestions or comments.
 
Last edited: Jul 19, 2017
Reactions: Davedacarpainter, Jersey Joe and RaggedGT

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Jul 18, 2017
#3
  • Jul 18, 2017
  • #3
Nice looking ride!

I wouldn't recommend the under drive pulleys as they can cause over heating and charging issues. I also wouldn't install the throttle body. It's really too big for your setup and the real restriction is in that 55mm MAF sensor. The headers will not hurt anything and may give you a H.P. or 2.

I would look at adjustable shocks and struts like the Koni Sports.
 
Reactions: Mstng93SSP

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Jul 18, 2017
#4
  • Jul 18, 2017
  • #4
I second that under drive pulley thing dan02gt said. They're not worth running hotter.

That car looks like a great starting point !!!
 
Reactions: Mstng93SSP

Jersey Joe

I remember blowing that Monkey's ass
10 Year Member
Nov 29, 1999
767
1,319
154
Bloomingdale N.j.
Jul 18, 2017
#5
  • Jul 18, 2017
  • #5
I just installed Koni str.t orange struts and shocks with Eibach pro''s springs on my 89 LX and it definitely firmed up the ride. At 275lbs I too was concerned about bounce ..haha
 
Reactions: mikestang63
S

SwampDog35

Member
Jul 10, 2017
8
7
13
Jul 19, 2017
#6
  • Jul 19, 2017
  • #6
Thank you all for the comments. I will take the advice on the UDP's and the Throttle Body.

My biggest thing currently is fixing the AC and finding the leak in the rear end.

My speedometer is off as well and that's on my list as well to fix.

I bounce around from 280 to 300 depending on the time of the year, So yeah I don't want that "Bounce" either. Thank you Jersey Joe.

More to come.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Jul 19, 2017
#7
  • Jul 19, 2017
  • #7
Ditch the UD pullies, check and replace rubber bushings throughout the car which will help with improving ride comfort somewhat, upgrade your alternator to a 3g from LMR. Are your shorty headers ceramic coated or chrome? I highly recommend ceramic over chrome! My ceramic BBK longtube headers still look new after 2 years and about 1,000 miles of driving. Chrome will not hold up as well and if you're doing any Cars n' Coffee meets and Ice Cream runs where you park and pop your hood the chrome won't be so appealing after several heat cycles and will eventually rust.

BTW, nice clean Fox!
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Jul 19, 2017
#8
  • Jul 19, 2017
  • #8
You mentioned fixing the hood latch. What is wrong with it? Does it not latch? You don't want the hood flying up...trust me.
 
S

SwampDog35

Member
Jul 10, 2017
8
7
13
Jul 19, 2017
#9
  • Jul 19, 2017
  • #9
The "T" handle under the steering wheel is broken. You've gotta have a nice grip in order to pop the hood.

It's just something to make working under the hood easier to tackle.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Jul 19, 2017
#10
  • Jul 19, 2017
  • #10
SwampDog35 said:
The "T" handle under the steering wheel is broken. You've gotta have a nice grip in order to pop the hood.

It's just something to make working under the hood easier to tackle.
Click to expand...
I've had the LMR replacement hood release handle and cable and it worked very well.
 
S

SwampDog35

Member
Jul 10, 2017
8
7
13
Jul 19, 2017
#11
  • Jul 19, 2017
  • #11
That's good to know. It's on my "Wish List" I've created on LMR's webiste.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,131
10,749
213
polk county florida
Jul 19, 2017
#12
  • Jul 19, 2017
  • #12
Don't forget, we get a discount.
And always tip your waiters and bartenders.
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Jul 20, 2017
#13
  • Jul 20, 2017
  • #13
You have a nice looking and with a good starting point on mods so just drive it and enjoy it.

Regarding your extra parts, like others have mentioned I would install the shorty headers it'll compliment the mid and catback setup.

Upgrading the throttle body isn't going to gain you anything with a stock motor and will more the likely cost you some low end torque. Either sell it or keep to compliment future modifications you may have planned.

Under drive pullies are often grouped together with the list of things not to do.. I personally never had a problem with running them but I knew what I was getting into before installing them. So do your research on them first and see if it's worth the 2 or 3 possibly hp. I personally given your need for the car and mod list wouldn't waste the time but if you do swap them out. They will show you if your cooling and charging systems are not up to snuff quickly.
 
Reactions: General karthief

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Jul 23, 2017
#14
  • Jul 23, 2017
  • #14
karthief said:
Don't forget, we get a discount.
And always tip your waiters and bartenders.
Click to expand...
We get a discount!? Aaargh! I must've made 2 or 3 purchases from there since joining stangnet.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,131
10,749
213
polk county florida
Jul 23, 2017
#15
  • Jul 23, 2017
  • #15
I guess it doen't get mentioned enought.
 

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Jul 23, 2017
#16
  • Jul 23, 2017
  • #16
karthief said:
I guess it doen't get mentioned enought.
Click to expand...
Nah. I'm relatively new. Just hearing about it.
 
You must log in or register to reply here.

Similar threads

Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
512
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
526
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
378
SVT Tech Forum Feb 20, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?