• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

My car keeps stalling and cutting out. Any suggestions?

  • Thread starter Thread starter SuperStang83
  • Start date Start date Mar 15, 2010

SuperStang83

Founding Member
Mar 21, 2001
1,693
0
49
Boyertown, Pa
Mar 15, 2010
#1
  • Mar 15, 2010
  • #1
I live in Pa, and travel to Dover which is a 2-3 hour ride once a month. The last 2 months or so the car has been cutting out and stalling when it was cold, but never did it when it was warmed up. It would typically do it about 3 times then would run great. It never really stalled that I had to restart the car. I just kept my foot on the gas where it had been. The car would only cut off for about half a second, and I wouldn't do anything and it would start itself back up and run normal.

Just last night on my way home from Dover the first half of the trip my car stalled about 25 times going down the road, and one time it sounded like it backfired out of the exhaust. It doesn't really matter the speed when the car cuts out, I could be going 5mph or 65 mph, and I never do anything it just starts right back up. For the last hour or so of my trip it ran great and didn't cut out at all.

i haven't had a chance to look at the car yet, and am unsure of where to start looking. Does anyone have any idea why it is acting up or had a similar experience? Thank you.


Jacob
 

Dino Dino Bambino

15 Year Member
Jun 13, 2007
1,672
89
79
Cyprus
Mar 15, 2010
#2
  • Mar 15, 2010
  • #2
This sounds like a faulty PIP sensor, though a faulty TFI module will produce similar symptoms. Since both are mounted on the distributor in a Fox body and both succumb to repeated heat cycles with age, your best bet might be to replace the whole distributor.
 

SuperStang83

Founding Member
Mar 21, 2001
1,693
0
49
Boyertown, Pa
Mar 15, 2010
#3
  • Mar 15, 2010
  • #3
Ok, thank you, I'll look into that. I don't know if it matters at all but it never has any trouble starting, or at least it hasn't yet.


Jacob
 
R

RatStang

New Member
Feb 11, 2010
544
0
0
Mar 15, 2010
#4
  • Mar 15, 2010
  • #4
Nope... that doesn't matter really. I'd replace the TFI first (read: I'm a cheap bastard) and replace the dizzy if that didn't fix it.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 15, 2010
#5
  • Mar 15, 2010
  • #5
Another thought Jacob: Did you ever replace the ignition switch since you've had the car? It's 20 bucks (dealer) and 20 minutes to replace. If you haven't done it, you might want to as a preventative measure.

Replace a 1979-1993 Ignition Switch Assembly
 

SuperStang83

Founding Member
Mar 21, 2001
1,693
0
49
Boyertown, Pa
Mar 15, 2010
#6
  • Mar 15, 2010
  • #6
HISSIN50 said:
Another thought Jacob: Did you ever replace the ignition switch since you've had the car? It's 20 bucks (dealer) and 20 minutes to replace. If you haven't done it, you might want to as a preventative measure.

Replace a 1979-1993 Ignition Switch Assembly
Click to expand...



Thanks for the link JT. I'll definitely look into that since it hasn't been changed for at least 3 years. Do you think that could be a reason for what is going on? What would the symptoms be for a bad ignition switch?

So what have you been up to bro? Ever since I've gotten back to Pa I have been unable to get a hold of you! I lost my phone about 6 months ago during our move and no longer have your number. If you don't mind PMing me your number, I'd love to catch up! Talk to you later bro!


Jacob
 
D

DonMaximo

Member
Sep 25, 2003
217
5
19
Lewisville, Texas
Mar 15, 2010
#7
  • Mar 15, 2010
  • #7
Hey Hissin - At first I would think the IAC was having issues... until he mentioned 25 restarts on first half of trip.

Could this be a bad/dying ECT on it's last leg ???

When things warm up, problems seem to go away...

Thoughts ???


HISSIN50 said:
Another thought Jacob: Did you ever replace the ignition switch since you've had the car? It's 20 bucks (dealer) and 20 minutes to replace. If you haven't done it, you might want to as a preventative measure.

Replace a 1979-1993 Ignition Switch Assembly
Click to expand...
 

SuperStang83

Founding Member
Mar 21, 2001
1,693
0
49
Boyertown, Pa
Mar 15, 2010
#8
  • Mar 15, 2010
  • #8
DonMaximo said:
Hey Hissin - At first I would think the IAC was having issues... until he mentioned 25 restarts on first half of trip.

Could this be a bad/dying ECT on it's last leg ???

When things warm up, problems seem to go away...

Thoughts ???
Click to expand...



At first it seemed that the problem went away when it warmed up, but yesterday the car was plenty warm when this was happening. I had been driving for over an hour and it was happening, but the second half of the trip it didn't do it at all and it ran perfectly! Stuff is frustrating at times.



Jacob
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 16, 2010
#9
  • Mar 16, 2010
  • #9
With the ignition switch, I've had them degrade on other cars and the symptoms were kinda similar. It's just something to check real quick (wiggle test the wiring and tap the switch connector while the car is idling). When things start to overheat, the wiring starts to burn and the connector starts to melt, which can lead to intermittant contact.

Don, the ECT isn't a bad idea. What's weird is that the car restarted itself. I think it's an actual component burping because if it was a sensor, the output would not change in one second (the ECT would read the same right before and after the stall, and it would not recatch unless something changed from when it stalled). It feels like a bad TFI, coil or ig switch. I'm just guessing aloud here however.

Jacob, I'll PM you my number. I have issues getting calls at the house (no signal). It'd be cool to catch up mang.
 
You must log in or register to reply here.

Similar threads

C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
756
Fox 5.0 Mustang Tech Friday at 5:04 PM
alutwon
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
258
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
720
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
136
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
267
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?