I would have liked to see the lower RPM range on the chart to see if the torque actually peaked there. Otherwise I definitely agree that the ft/lbs seem low. This was all done on a Mustang Dyno.
I would have liked to see the lower RPM range on the chart to see if the torque actually peaked there. Otherwise I definitely agree that the ft/lbs seem low. This was all done on a Mustang Dyno.
On the second run we ran it with the 75 shot but it only made like 325hp so we tossed in the 100 shot jets, with no further timing adjustments or mods mind you. The stock plugs are still in the heads too. We were all very happy with a perfect 12.5:1 A/F ratio.
The first run was completely without the aid of nitrous, the 275hp Im fine with but with the lack of the first few thousand rpms not measured Im not impressed with the torque even though it sits well @ its crossover (5350).