• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

My Mechanic has a ?

  • Thread starter Thread starter jimdrechsler
  • Start date Start date Sep 21, 2007

jimdrechsler

Member
Jun 29, 2006
248
1
18
Sep 21, 2007
#1
  • Sep 21, 2007
  • #1
I do have a question if you can check your Mustang Sites/ ref. With the changes in the Rear End, Are people removing the Lateral Shock that controls axle Torque/ axle Hop. I was thinking of leaving it in place.


Does anyone know the answer to the aforementioned? he is doing the upper and lower control arms and torque box reinforcements for me.


thanks in advance!

jim
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Sep 21, 2007
#2
  • Sep 21, 2007
  • #2
those are the quad shocks and unless you want wheel hop on launches i would advise leaving them on.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Sep 21, 2007
#3
  • Sep 21, 2007
  • #3
If your lower and upper control arms are stock leave them on. With a good set of aftermarket control arms with good bushings in them you can usally turf the quad shocks.
 

jimdrechsler

Member
Jun 29, 2006
248
1
18
Sep 21, 2007
#4
  • Sep 21, 2007
  • #4
ihe is putting in new upper and lowers. should i keep them anyway, or do most people ditch it?

thanks!
 

302RollinHard

New Member
Sep 26, 2005
0
0
0
Columbus, OH
Sep 21, 2007
#5
  • Sep 21, 2007
  • #5
they don't hurt to be on the car so.........leave em. People ditch them for wheel/tire clearance issues, usually not just for fun.
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Sep 21, 2007
#6
  • Sep 21, 2007
  • #6
You can turn the quad shocks around for tire clearance. I would suggest leaving them as they're not really hurting anything.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 21, 2007
#7
  • Sep 21, 2007
  • #7
I'd leave them, because as said, they aren't hurting you.

With an good AFTERMARKET set of upper/lower's, you could remove them typically.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Sep 21, 2007
#8
  • Sep 21, 2007
  • #8
You can leave it or remove it. I removed mine, they were original and old. No problems at all. Upr double adjustable uppers, MM lowers with upper and lower torque box reinforcements.
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Sep 21, 2007
#9
  • Sep 21, 2007
  • #9
FWIW, I have Maximum Motorsports LCAs and stock uppers with all new bushings, but no quad shocks on my car and I have some wheel hop. I pulled them since they were leaking when I installed the uppers & lowers. The previous 260,000 mile worn out stock suspension with quads had no wheel hop at all. I now have a newer set of quads I'm installing next time I pull the rear wheels off.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Sep 21, 2007
#10
  • Sep 21, 2007
  • #10
Leave them alone.

Even with aftermarker control arms, SOME cars do still get wheel hop.

Just leave them in place, do you really need to save 3 pounds that badly??
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 21, 2007
#11
  • Sep 21, 2007
  • #11
The quad shocks are a roll of the dice. No matter what the combination of tires, control arms and shocks, some cars will wheel hop without quad shocks and some won't. There are so many variables in 28-13 year old cars with wear, misalignment and combinations of suspension components and tires that one unchanging answer won't work for everyone.

I personally would install them, and make sure they are in good shape. I do know this, that Ford is cheap. If they could have made changes in some simple component like bushings or control arm construction and saved $10, they would have done it. Multiply $10 times all the Fox body Mustangs ever made and you would be almost as rich as Donald Trump. That's a lot of $$$, and good incentive to engineer something to do away with the quad shocks.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Sep 21, 2007
#12
  • Sep 21, 2007
  • #12
I'm finding myself having to agree with everyone here. Chances are your stock ones are worn out though, so I'd pick up some replacements. Would it hurt anything to leave them off? No, but you may expose yourself to wheel hop and wish you still had them.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Sep 21, 2007
#13
  • Sep 21, 2007
  • #13
jrichker said:
I personally would install them, and make sure they are in good shape. I do know this, that Ford is cheap. If they could have made changes in some simple component like bushings or control arm construction and saved $10, they would have done it. Multiply $10 times all the Fox body Mustangs ever made and you would be almost as rich as Donald Trump. That's a lot of $$$, and good incentive to engineer something to do away with the quad shocks.
Click to expand...


Exactly.

It would have been easier and cheaper to engineer a better bushing design rather than put quads on every V8 Mustang made over the course of 1986 to 2004.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Sep 22, 2007
#14
  • Sep 22, 2007
  • #14
if they fit with your tire combo RUN THEM

i put aftermarket upper and lower arms on and ran no quads for week and the sonabitch wheelhopped BAD, everytime i gave it any gas to go fast it just started hopping.

i ordered a new set and run them flipped, they clear my street tires and drag tire combo. and the wheelhop problem is gone.

they are cheap so if u can run them by all means do it
 
You must log in or register to reply here.

Similar threads

D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
181
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
New Products From J&M Products - 1979-1998 & 1999-2004 Race/Extreme Duty Rear Lower Control Arms
  • J&M Products
  • Oct 9, 2025
  • Vendor Sponsor Forums
Replies
0
Views
474
Vendor Sponsor Forums Oct 9, 2025
J&M Products
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
7K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
Suspension Foxbody ride height change after installing new control arms
  • Mhalc1
  • Jan 3, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
36
Views
10K
Fox 5.0 Mustang Tech May 10, 2024
Mhalc1
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
467
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?