My Mechanic has a ?

jimdrechsler

Member
Jun 29, 2006
248
1
18
I do have a question if you can check your Mustang Sites/ ref. With the changes in the Rear End, Are people removing the Lateral Shock that controls axle Torque/ axle Hop. I was thinking of leaving it in place.


Does anyone know the answer to the aforementioned? he is doing the upper and lower control arms and torque box reinforcements for me.


thanks in advance!

jim
 
You can leave it or remove it. I removed mine, they were original and old. No problems at all. Upr double adjustable uppers, MM lowers with upper and lower torque box reinforcements.
 
FWIW, I have Maximum Motorsports LCAs and stock uppers with all new bushings, but no quad shocks on my car and I have some wheel hop. I pulled them since they were leaking when I installed the uppers & lowers. The previous 260,000 mile worn out stock suspension with quads had no wheel hop at all. I now have a newer set of quads I'm installing next time I pull the rear wheels off.
 
The quad shocks are a roll of the dice. No matter what the combination of tires, control arms and shocks, some cars will wheel hop without quad shocks and some won't. There are so many variables in 28-13 year old cars with wear, misalignment and combinations of suspension components and tires that one unchanging answer won't work for everyone.

I personally would install them, and make sure they are in good shape. I do know this, that Ford is cheap. If they could have made changes in some simple component like bushings or control arm construction and saved $10, they would have done it. Multiply $10 times all the Fox body Mustangs ever made and you would be almost as rich as Donald Trump. That's a lot of $$$, and good incentive to engineer something to do away with the quad shocks.
 
I'm finding myself having to agree with everyone here. Chances are your stock ones are worn out though, so I'd pick up some replacements. Would it hurt anything to leave them off? No, but you may expose yourself to wheel hop and wish you still had them.
 
I personally would install them, and make sure they are in good shape. I do know this, that Ford is cheap. If they could have made changes in some simple component like bushings or control arm construction and saved $10, they would have done it. Multiply $10 times all the Fox body Mustangs ever made and you would be almost as rich as Donald Trump. That's a lot of $$$, and good incentive to engineer something to do away with the quad shocks.


Exactly.

It would have been easier and cheaper to engineer a better bushing design rather than put quads on every V8 Mustang made over the course of 1986 to 2004.
 
if they fit with your tire combo RUN THEM

i put aftermarket upper and lower arms on and ran no quads for week and the sonabitch wheelhopped BAD, everytime i gave it any gas to go fast it just started hopping.

i ordered a new set and run them flipped, they clear my street tires and drag tire combo. and the wheelhop problem is gone.

they are cheap so if u can run them by all means do it