Yes, the same intake was used on the 94/95 Cobras. The only difference is the intake plaque. The original Cobras had a snake and 'COBRA' lettering on the top where yours says 'Ford Motorsports SVO.'
I am in the process of polishing my Cobra intake. Just out of curiosity how much did they charge to polish the upper? THX
I believe ford changed the plaque to distinguish it from the actual 94-95 cobra intake but it is the same. As far as i know they only made theCobra "Ford Motorsport SVO" intake (like yours) for 94-95's and all 87-93 Cobra intakes had a "Cobra" plaque on it.
Mike
Has that thing been cut open and ported? It sure looks like weld marks on all of the ports. If that's the case that thing should be a stout little performer if the work was done right, and if the effort was taken to cut it open and do it, I'd think it was.
Canary I dont know what your looking at explain, it might have been im not too sure actually any way of telling want me to take a pic of anything else so u can tell?
Look at the red arrows, these are what I'm refering to. They look like the intake was cut and welded back together here. This is done on these type of intakes to get access to the upper intake ports for porting. Typically the upper inatake is fine and doesn't need much if any work at all, the lower however can really benefit from a port job.