Need a little help with my BOV please.

[fastf50rd]

I was just wondering what line i connect to my BOV. Do i just connect it to a vacuum line? I have a 1/4" or 3/8" brass 90 that's coming out of the s/c housing. Am i supposed to connect a line from this to the BOV, or is that fitting for the FMU? Please help, thanks.

 

[94TURBO5 O]

Is it a Vortech? Anyways my vacuum line that comes out of the bypass valve goes into my intake where the FPR is tapped in. I have it connected to the other nipple beside that one for the FPR and from that T'd my boost gauge from it as well.

 

[fastf50rd]

its a paxton sn93. So i just need to hook it up to vacuum from my intake? What's the fitting on the s/c for then? Must be the fmu.

 

[94TURBO5 O]

Hmmm...I don't know anything about the Paxton's. On the Vortech there is a discharge tube and one tube for my PP only. The discharge tube has the nipple for the bypass and the bypass has a nipple for vacuum/boost line.

 

[fastf50rd]

anyone with an SN series paxton? I doubt it.

 

[yellow1995Cobra]

Yes the BOV/bypass valve needs vaccum. You can get it from the compressor housing itself, or intake. It doesnt matter.