GTs have a different oil filter adapter. You can get one new from Ford, but try so junkyards.
You can see a picture here: http://www.seanhylandmotorsport.com...d=248&osCsid=46e05bbc0aa99662d57ca79069882dad
Also, your oil cooler setup goes for about 80 dollars on eBay, so you might find someone with a GT who would just switch with you. You get the clearance, and the other guy gets a nice cooling mod for his GT.
I am in the process of putting one of these oil coolers on my Saleen.
You can see a picture here: http://www.seanhylandmotorsport.com...d=248&osCsid=46e05bbc0aa99662d57ca79069882dad
Also, your oil cooler setup goes for about 80 dollars on eBay, so you might find someone with a GT who would just switch with you. You get the clearance, and the other guy gets a nice cooling mod for his GT.
I am in the process of putting one of these oil coolers on my Saleen.
The hose does hook up in approximately the same location.
You should be able to call any ford dealer parts department and get that number. If you shop arounnd, I gaurantee you can beat SHM's prices, they are pretty steep!
EDIT: Ok, I have the part #
The GT oil filter adaptor (without the cooler) YR3Z-6881-BA $144.00
gasket is F6AZ-6840-AA $9.00
Definitely get a new gasket, otherwise it could leak.
I have the part numbers for the cobra oil cooler parts as well. The GT oil filter adaptor uses a shorter lower bolt, but I dont have the part # for that, sorry.
You should be able to call any ford dealer parts department and get that number. If you shop arounnd, I gaurantee you can beat SHM's prices, they are pretty steep!
EDIT: Ok, I have the part #
The GT oil filter adaptor (without the cooler) YR3Z-6881-BA $144.00
gasket is F6AZ-6840-AA $9.00
Definitely get a new gasket, otherwise it could leak.
I have the part numbers for the cobra oil cooler parts as well. The GT oil filter adaptor uses a shorter lower bolt, but I dont have the part # for that, sorry.