Need advice for good rotating assembly (piston,rod,crank)............

Slow5.0

Active Member
Feb 13, 2003
2,554
0
46
Portland, OR
Well i decide to go with Dart Sportsman 302 block
Now i have to figure out what internals i gonna use
Its gonna be bosted motor so everything have to be very good stuff forged

For HP # ,i don't know how high i wanna go but i wanna have space for more so i don't care if is over kill ,because this motor have to produce some crazy power
Heads i gonna use most likely gonna be TFS TW R
BTW its not race motor since its gonna be in street Stang that will see track once or twice a month

Anyway HP #s i looking for are 650+ and money its not problem

So who makes good internals and what are good combos

Thank you
 
  • Sponsors (?)


SCAT or Eagle will both hold up fine for the power your wanting to make and will leave you plenty of room to grow with. 650+ can be attained with a CNC ported TW head or AFR 205 or 225...unless you are looking to make close to 1000hp I would not go with the TW R head. What power are you going with...turbo or supercharger...and which size?