Need answer quick

[ID89GT]

Ok so I finally got my flywheel for doing my 351 from Dynamic racing today. Problem is im not sure where to line the weight on the flywheel up with the crank. there is a hole on the back side of the crank as if a dowel would go in or something but I can't find anything that will tell me how to reference..

 

[BlownFiveLiter]

It will only line up one way. The holes look evenly spaced to the naked eye, but if you spin it around on the crank, you'll notice that the bolt holes are offset, so that the flywheel can only be bolted on with the counterweight in the correct orientation.

 

[ID89GT]

Alrighty thank you very much!