Need Help Dont Know If My Clutch Is Going

DerekFbody

New Member

Dec 11, 2013

15

0

2

Phoenix, Arizona

Dec 11, 2013

#1

• Dec 11, 2013

• #1

I recently bought a sve cold air intake from latemodelrestoration and ever since I installed it my car has no power in 1st nor 2nd until I get past 3k rpm my mods that the guy I bought it from said is it has gears and a camshaft (e303) and full exhaust other than that it's stock wat could be the problem please help

 

94GTCoupe

10 Year Member

May 7, 2006

1,412

92

79

CA

Dec 11, 2013

#2

• Dec 11, 2013

• #2

Welcome.
is the check engine light on?
Have you pulled the codes?

Did the issue start immediately after the cai install?
Perhaps you damaged the MAF?

 

madspeed

Colonel Mustard

Founding Member

Nov 29, 1999

8,914

1,332

204

a van down by the river

Dec 11, 2013

#3

• Dec 11, 2013

• #3

plug the maf back in sir

 

madspeed

Colonel Mustard

Founding Member

Nov 29, 1999

8,914

1,332

204

a van down by the river

Dec 11, 2013

#4

• Dec 11, 2013

• #4

thread moved, pease post model year so we can steer you in the right direction

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

Dec 11, 2013

#5

• Dec 11, 2013

• #5

and the problem with the clutch is?

 

Reactions: A5literMan

DerekFbody

New Member

Dec 11, 2013

15

0

2

Phoenix, Arizona

Dec 12, 2013

#6

• Dec 12, 2013

• #6

davis3 said:

Welcome.
is the check engine light on?
Have you pulled the codes?

Did the issue start immediately after the cai install?
Perhaps you damaged the MAF?

Click to expand...

Yes it did but there is no check engine like the car is a 91

 

tamadrummer88

Active Member

Aug 19, 2005

599

79

39

Aloha State

Dec 12, 2013

#7

• Dec 12, 2013

• #7

mikestang63 said:

and the problem with the clutch is?

Click to expand...

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,249

17,932

224

Massachusetts

Dec 12, 2013

#8

• Dec 12, 2013

• #8

Down on power isn't a clutch issue. A slipping clutch is a clutch issue.

You issue pertains to the CAI install. Check to make sure all electrical was reinstalled and connected properly, especially the MAF. Also, double check your install. Make sure nothing was accidentally in the filter and is now sucked into your MAF and blocking airflow (i've seen this before)

 

jcgafford

10 Year Member

Jan 7, 2012

1,114

95

104

Adrian, MI

Dec 12, 2013

#9

• Dec 12, 2013

• #9

DerekFbody said:

Yes it did but there is no check engine like the car is a 91

Click to expand...

91's have a functional check engine light. just because it is not lit does not mean there are not codes. it has been stated that only about ten percent of the possible engine codes will actually light the cel. dump the codes

 

flstang65

10 Year Member

Dec 6, 2007

1,484

135

94

SE Georgia

Dec 12, 2013

#10

• Dec 12, 2013

• #10

Maybe post up a pic or 2 of your install?

 

DerekFbody

New Member

Dec 11, 2013

15

0

2

Phoenix, Arizona

Dec 12, 2013

#11

• Dec 12, 2013

• #11

jcgafford said:

91's have a functional check engine light. just because it is not lit does not mean there are not codes. it has been stated that only about ten percent of the possible engine codes will actually light the cel. dump the codes

Click to expand...

How do you dump the codes

 

DerekFbody

New Member

Dec 11, 2013

15

0

2

Phoenix, Arizona

Dec 12, 2013

#12

• Dec 12, 2013

• #12

flstang65 said:

Maybe post up a pic or 2 of your install?

Click to expand...

When I have a chance I will

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

Dec 12, 2013

#13

• Dec 12, 2013

• #13

DerekFbody said:

How do you dump the codes

Click to expand...

Go to the tech sticky section and it's there.