• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

NEED HELP FAST!!

  • Thread starter Thread starter cooper1320
  • Start date Start date Mar 6, 2007
C

cooper1320

New Member
Mar 5, 2007
7
0
1
Mar 6, 2007
#1
  • Mar 6, 2007
  • #1
Does anyone know Y a fine lil stream of water would be coming out from behind the motor, it looks like its a lil bit right under the vaule cover on the driver side, my pop said a freezz plug?? does any one know what the real problem is. thanks 4 any help LMK guys
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 6, 2007
#2
  • Mar 6, 2007
  • #2
Head or intake gasket?
 
C

cooper1320

New Member
Mar 5, 2007
7
0
1
Mar 6, 2007
#3
  • Mar 6, 2007
  • #3
StangGT1995 said:
Head or intake gasket?
Click to expand...

water coming out of the intake?? and water coming out of the head??? i didnt even know theres water coming from there
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Mar 6, 2007
#4
  • Mar 6, 2007
  • #4
Could be a freeze plug

Look below the 'S' in SVO on my cyclinder head. The large circle is a freeze plug and there is one on both sides of each head.

 
C

cooper1320

New Member
Mar 5, 2007
7
0
1
Mar 6, 2007
#5
  • Mar 6, 2007
  • #5
JJ95GTID said:
Look below the 'S' in SVO on my cyclinder head. The large circle is a freeze plug and there is one on both sides of each head.

Click to expand...

oo ok the ones on the back r the in the same place, on the HEAD!!
 
C

cooper1320

New Member
Mar 5, 2007
7
0
1
Mar 6, 2007
#6
  • Mar 6, 2007
  • #6
cooper1320 said:
oo ok the ones on the back r the in the same place, on the HEAD!!
Click to expand...



OK ur right i ran out side to make sure the leak was coming form there and it is, it's the one on the back on the driver side, but now how do u fix it??
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Mar 6, 2007
#7
  • Mar 6, 2007
  • #7
cooper1320 said:
oo ok the ones on the back r the in the same place, on the HEAD!!
Click to expand...

If that's a question then yes
They are in the same place on both sides of each head.

BTW.....Welcome to :SNSign:
 
C

cooper1320

New Member
Mar 5, 2007
7
0
1
Mar 6, 2007
#8
  • Mar 6, 2007
  • #8
JJ95GTID said:
If that's a question then yes
They are in the same place on both sides of each head.

BTW.....Welcome to :SNSign:
Click to expand...



o yea thanks man u and STANGNET were the biggest help compared to the rest of the forums i post the same ? on
 

JJ95GTID

Active Member
Sep 22, 2003
1,141
4
49
Phoenix, AZ
Mar 6, 2007
#9
  • Mar 6, 2007
  • #9
cooper1320 said:
OK ur right i ran out side to make sure the leak was coming form there and it is, it's the one on the back on the driver side, but now how do u fix it??
Click to expand...

You need to remove it and replace with a new freeze plug.
I doubt it would be worth the hassle of trying to do with the head on the engine.
Best way is to remove the head and put in a new plug.

You could try some form of Stop Leak. It is like a salt shaker full of aluminum shards that you buy from any auto parts store. You pour the shards into the radiator and hope that the shards find their way to the leak and clog the opening.

Or, if you are OLD SCHOOL you would use a full pepper shaker and pour that into the radiator. It is what we did back in the day before the fancy aluminum shards came out in the auto part stores.
 
You must log in or register to reply here.

Similar threads

E
  • Sticky
2003 Mustang GT convertible water leak
  • Eightiesrock1980
  • Jul 27, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
353
1996 - 2004 SN95 Mustang -General/Talk- Jul 28, 2026
Noobz347
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
550
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
950
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
163
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?