• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help wiring guages

  • Thread starter Thread starter stykthyn
  • Start date Start date Jan 15, 2008

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jan 15, 2008
#1
  • Jan 15, 2008
  • #1
I am installing a vacuum and water temp guage and I was wondering what was the best wire to tap into?
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Jan 15, 2008
#2
  • Jan 15, 2008
  • #2
are you refering to the wiring for the lights?? i would use the headlight wire. it should be a bigger red wire on the headlight plug. there will be 6 wires going in, tap into the big red one. on my car that was the wire for the headlights and went 12v when the headlight switch was pressed.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2008
#3
  • Jan 15, 2008
  • #3
I'd use the brown wire (parking lights - that's when the rest of your instrment lights come on). You can also tap into the dimmer circuit so your gauges are dimmed with the rheostat. Fuse 13 or the dimmer or any existing dimmer light can be tapped into.

I would tap into the ignition wire under the column that's hot during crank and running but most folks pick a switched 12 volt donor circuit and call it good.

Good luck.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Jan 15, 2008
#4
  • Jan 15, 2008
  • #4
i tried the parking lights wire and it was only putting out 7-9V and the guages lit up dimmer than with a 12v source.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2008
#5
  • Jan 15, 2008
  • #5
Foxfan88 said:
i tried the parking lights wire and it was only putting out 7-9V and the guages lit up dimmer than with a 12v source.
Click to expand...

Are you sure you were not in the dimmer circuit? When you put a test light to it, the test light dims as the dimmer is run down (and a DMM shows diminished voltage).

Otherwise, there's an issue with the parking light portion of your lighting circuit that you might want to fix.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jan 15, 2008
#6
  • Jan 15, 2008
  • #6
I tapped my dimmer so all my gauges can dim.
Kevin
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jan 15, 2008
#7
  • Jan 15, 2008
  • #7
HISSIN50 said:
I'd use the brown wire (parking lights - that's when the rest of your instrment lights come on). You can also tap into the dimmer circuit so your gauges are dimmed with the rheostat. Fuse 13 or the dimmer or any existing dimmer light can be tapped into.

I would tap into the ignition wire under the column that's hot during crank and running but most folks pick a switched 12 volt donor circuit and call it good.

Good luck.
Click to expand...

that's what I was looking for, I tried the dimmer and it didnt look that good, the brown wire worked perfectly. Thanks Guys!
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid green wire?
  • 387lx
  • Jun 1, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
263
Fox 5.0 Mustang Tech Jun 2, 2026
AeroCoupe
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Engine Standard or hi flow water pump?
  • AnthonyA1234
  • Sep 28, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
432
Fox 5.0 Mustang Tech Oct 9, 2026
2000xp8
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
P
I need definitive heater valve and AC expansion valve answers
  • PurAU
  • Sep 26, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
252
1965 - 1973 Classic Mustangs -General/Talk- Oct 1, 2026
GypsyR
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?