• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Need help with 99 GT.

  • Thread starter Thread starter PeaRidgeBoy
  • Start date Start date Aug 15, 2005
P

PeaRidgeBoy

New Member
Apr 27, 2004
6
0
0
Aug 15, 2005
#1
  • Aug 15, 2005
  • #1
I've owned a few foxes and a couple 94-95 GT's, but I recently bought a 99 GT and I know nothing about these motors. As far as I can tell so far, this car has a stainless Bassani X-pipe, and catback. It also has a 77 Pro M mass air, and some kind of Steeda springs. What are the usual bolt ons and basics on these cars? I'm thinking about some 4.10's. I would like some advice though.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Aug 15, 2005
#2
  • Aug 15, 2005
  • #2
remove the pro-m it's only hurting your car. get the stock one.

4.10's - recomended
 
P

PeaRidgeBoy

New Member
Apr 27, 2004
6
0
0
Aug 15, 2005
#3
  • Aug 15, 2005
  • #3
tomustang said:
remove the pro-m it's only hurting your car. get the stock one.

4.10's - recomended
Click to expand...

not saying you're wrong, just wondering why the pro m is hurting it? What is better about the stock one?
 
S

Stangboy017

New Member
Jul 30, 2005
35
0
0
Aug 15, 2005
#4
  • Aug 15, 2005
  • #4
that's what the car is tuned for
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Aug 15, 2005
#5
  • Aug 15, 2005
  • #5
Put the stock intake back on, do not forget to reset the PCM when you do so.
 

jstreet0204

Active Member
Jun 26, 2003
939
0
36
Winston Salem, NC
Aug 15, 2005
#6
  • Aug 15, 2005
  • #6
PeaRidgeBoy said:
not saying you're wrong, just wondering why the pro m is hurting it? What is better about the stock one?
Click to expand...

Before taking anyones advice on taking the pro-m off make sure you don't already have chip or flash tune with the pro-m's transfer curve programed into it. If so the pro-m is about the best of the aftermarket MAF's and probably isn't hurting you any. If it hasn't been tuned for the pro-m, the stock MAF will work better.

On a side note, you wouldn't happen to be from Pea Ridge, FL would you?
 
P

PeaRidgeBoy

New Member
Apr 27, 2004
6
0
0
Aug 15, 2005
#7
  • Aug 15, 2005
  • #7
jstreet0204 said:
Before taking anyones advice on taking the pro-m off make sure you don't already have chip or flash tune with the pro-m's transfer curve programed into it. If so the pro-m is about the best of the aftermarket MAF's and probably isn't hurting you any. If it hasn't been tuned for the pro-m, the stock MAF will work better.

On a side note, you wouldn't happen to be from Pea Ridge, FL would you?
Click to expand...

I'll look into it, thanks. Not FL, I'm from Alabama.
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
Aug 15, 2005
#8
  • Aug 15, 2005
  • #8
Usually boltons underdrives, gears, shifter, chassis stuff. Then more power choice your weapon n20, blower, turbo, N/A setup.
I'm wondering why you dislike the pro-m Tom has been my exp. that the pro-m's are the best.
 
S

Stangboy017

New Member
Jul 30, 2005
35
0
0
Aug 15, 2005
#9
  • Aug 15, 2005
  • #9
because the car isn't tuned for an MAF that size, it'll tend to lean out if you dont have it tuned for the larger MAF
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Aug 15, 2005
#10
  • Aug 15, 2005
  • #10
i doubt people go out and just add an MAF and have the car tuned to it. most people just buy the MAF and disregard the fact that is needs to be tuned/setup correctly.
 

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Aug 15, 2005
#11
  • Aug 15, 2005
  • #11
that and the fact that the stocker maf is good up to 350-400hp give or take. theres no real need for it in a n/a stock non force induction application
 
P

PeaRidgeBoy

New Member
Apr 27, 2004
6
0
0
Aug 15, 2005
#12
  • Aug 15, 2005
  • #12
When you guys talk about a N/A setup, are there any after market heads for this motor, or what all are you talking about?
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Aug 15, 2005
#13
  • Aug 15, 2005
  • #13
PeaRidgeBoy said:
When you guys talk about a N/A setup, are there any after market heads for this motor, or what all are you talking about?
Click to expand...


I know this is not a direct answer, but this thread is pretty informative.
http://forums.modulardepot.com/showthread.php?s=&threadid=1877
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Aug 15, 2005
#14
  • Aug 15, 2005
  • #14
All the aftermarket heads are the stock 99-04 heads (the ones you have) just worked over. porting, cams etc...
 
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
439
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
D
96 get convertible-sell or part out?
  • DTCstang
  • May 17, 2026
  • What is it Worth?!?!?
Replies
5
Views
312
What is it Worth?!?!? May 18, 2026
nickyb
D
Will 2023 (Non-Handling Pack) Mach 1 Wheels Fit A 2013 Mustang GT OK?
  • dmw_4814
  • Oct 27, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
116
2010 - 2014 Specific Tech Oct 27, 2026
dmw_4814
D
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
371
SVT Tech Forum Feb 20, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?