• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

need help with eibach springs

  • Thread starter Thread starter 04torchredgt
  • Start date Start date Mar 19, 2004
0

04torchredgt

New Member
Feb 29, 2004
22
0
0
mcdonough,ga
Mar 19, 2004
#1
  • Mar 19, 2004
  • #1
i went to my local speedshop to get some eibach pro-kit springs installed today.but they ended up ordering and installing the sportsline springs.i was going to make them switch back my factory springs,but after lokking at the car i am happy with the drop.my question is about the struts and shocks,i know my stockers aint gonna last,but how long will they last.the car only has 4,000 miles.will they hold up for 6 months or so till i have money for new ones.i also know that i'm gonna need cc plates so i'm gonna orer them tommorow.
 

Trublu01

SPRAYMAN
Founding Member
Mar 11, 2001
6,673
0
0
Loxahatchee, FL
Mar 19, 2004
#2
  • Mar 19, 2004
  • #2
You should have no problems, just replace them when you can.
 

jeff1414

New Member
Jun 19, 2003
447
0
0
Sacramento
Mar 19, 2004
#3
  • Mar 19, 2004
  • #3
stock shocks for a year now with my sportlines and no problems but get those cc plates as soon as possible...
 

Jinx

I like cats, cats like me. Cats and I fully agree.
20+ Year Stangneter
Oct 2, 2003
12,166
4,237
223
Cat Country
Mar 19, 2004
#4
  • Mar 19, 2004
  • #4
jeff1414 said:
stock shocks for a year now with my sportlines and no problems but get those cc plates as soon as possible...
Click to expand...


cause if you don't get those cc plates soon, you will probably need to get some new tires with those struts 6 months down the road.

Good Luck
 
0

03Sleeper

New Member
Apr 29, 2003
464
0
0
Fordville,USA
Mar 19, 2004
#5
  • Mar 19, 2004
  • #5
not if you get an alinement!
I got a perfect alinement with my H&R's and they didn't need c.c.plates!
 
0

04torchredgt

New Member
Feb 29, 2004
22
0
0
mcdonough,ga
Mar 19, 2004
#6
  • Mar 19, 2004
  • #6
thanks for the replys guys
 

jeff1414

New Member
Jun 19, 2003
447
0
0
Sacramento
Mar 19, 2004
#7
  • Mar 19, 2004
  • #7
03Sleeper said:
not if you get an alinement!
I got a perfect alinement with my H&R's and they didn't need c.c.plates!
Click to expand...

Well not EVERYONE likes h&r's.....seems like you are always bashing eibach
 

Jinx

I like cats, cats like me. Cats and I fully agree.
20+ Year Stangneter
Oct 2, 2003
12,166
4,237
223
Cat Country
Mar 19, 2004
#8
  • Mar 19, 2004
  • #8
03Sleeper said:
not if you get an alinement!
I got a perfect alinement with my H&R's and they didn't need c.c.plates!
Click to expand...

I hear ya man (good springs). I got the Eibach Pros and didn't need the cc plates because I got an alignment. However, the Eibach Sport lines drop the vehicle to a point where the factory CC plates can't compensate for the change. So one must dip into ones wallet and invest in some new cc plates.
 

wms004

Founding Member
Jan 15, 2002
2,864
2
49
Los Angeles
Mar 19, 2004
#9
  • Mar 19, 2004
  • #9
04torchredgt said:
i went to my local speedshop to get some eibach pro-kit springs installed today.but they ended up ordering and installing the sportsline springs.i was going to make them switch back my factory springs,but after lokking at the car i am happy with the drop.my question is about the struts and shocks,i know my stockers aint gonna last,but how long will they last.the car only has 4,000 miles.will they hold up for 6 months or so till i have money for new ones.i also know that i'm gonna need cc plates so i'm gonna orer them tommorow.
Click to expand...
Get some appropriate length bilsteins (made for '93 foxbody i think), or some tokico illumina 5-way adj., or KYB AGX adj.. You could probably convince the shop to give you a deal on shock/strut install since they installed the wrong ones causing you to have to buy cc plates and the need to install new dampers earlier than expected.

-wade
 

hognutz

New Member
Nov 12, 2002
1,940
0
0
albany, oregon
Mar 19, 2004
#10
  • Mar 19, 2004
  • #10
bilstien only makes 1 lenghth strut for new stangs. same part # for the fox body as the new stangs. other companies make a 1" shorter version for the fox body.

basically there is alot of myths about CC plates. they are not only for alinement. they alow you ajust the strut mount point to compesate for the lowered car. good ones also have a sperical bearing that will not defelect as much thus maintaining aliment better in a coner. the shocks and struts are engineered a certain lenght. when you lower the car it compresses the struts. now fox body struts of certain brands are 1" shorter. so if lowering you car 1 inch you could buy just those.

now at 2" drop the only way to do it right is CC plates. I dont' understand why people cut this corner. if you just want low cut your springs. it is free. thats what I did to my chevelle in highschool. road like 'Kiss Me''Kiss Me''Kiss Me''Kiss Me' but it was slammed.

that being said there are tons of people who will chime in and say I am lowered 2 inches on stock shocks and strust. you won't see those people setting in lap records or putting 50k on the clock with those shocks and struts. I am sure they will last 6 months till you can afford the upgrade.
 
0

03Sleeper

New Member
Apr 29, 2003
464
0
0
Fordville,USA
Mar 19, 2004
#11
  • Mar 19, 2004
  • #11
jeff1414 said:
Well not EVERYONE likes h&r's.....seems like you are always bashing eibach
Click to expand...
Well I HAD eibach and I disliked the ride VERY much!
BUT this is only one man's opinon!
the H&R's just handle much better I had both on the same car so I know what I'M talking about but the ride is something you just have to like or hate??
So Sorry if my bashing comes out that way but I've been down that BUMPY road!
 

jeff1414

New Member
Jun 19, 2003
447
0
0
Sacramento
Mar 19, 2004
#12
  • Mar 19, 2004
  • #12
03Sleeper said:
Well I HAD eibach and I disliked the ride VERY much!
BUT this is only one man's opinon!
the H&R's just handle much better I had both on the same car so I know what I'M talking about but the ride is something you just have to like or hate??
So Sorry if my bashing comes out that way but I've been down that BUMPY road!
Click to expand...


Um I don't seem to have that bumby problem like you may of had!! But that is me. My car handles alot that what it did. People like lower drops. looks alot better Imo. but you comment was unnessary for the tread IMO..Quick Q what size are you tires?
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
952
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Progress Thread 87 T-top slow progress
  • wobbyguy
  • Feb 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
792
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 10, 2025
nickyb
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
401
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
M
Eibach springs are driving me nuts
  • Michael Fedenko
  • Apr 2, 2022
  • 2005 - 2014 Specific V6 Tech
Replies
3
Views
1K
2005 - 2014 Specific V6 Tech Aug 12, 2022
kendawg73
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?