need help with testing compression

IMO, doing a wet test is not accurate. Your numbers still look just fine. Wet tests are usually for when you have abnormally low compression in a cylinder and you want to test the rings by adding oil in the cylinder. If the compression goes up a lot, then you know the rings are bad. But in your case, all your dry numbers are fine. Wet tests just are not consistent enough. Besides, who drives around with excess oil in their cylinders all the time? Go by the dry numbers.
 
even though they jumped so much from dry to wet?

Fast's reply was a good one.

The numbers didnt jump much at all. You can see some big spreads when ring-seal takes a dump.

As a matter of routine, I do dry and wet tests (it takes but a couple extra minutes to do the second test) and log the info for future reference.