The rear passenger-side caliper is apparently sticking on my '98GT, because the pad has worn at nearly twice the rate as the driver's side pad. The brake pads are original at 71K miles, and the rear driver's side pad still has nearly 1/2 remaining. The passenger's side pad is completely worn out, so I can only assume that the caliper is sticking. These are the options that I've considered for replacement:
1. Bullitt rear calipers, because I think the rotor size is the same. Is there really any difference between these rear calipers and the stock GT ones?
2. Re-manufactured Cobra calipers, because I can get them from AutoZone for about $10/caliper more than the GT calipers. Will these fit the stock rotors? I'm not sure of the actual rotor size on my car.
Any other suggestions/opinions would be greatly appreciated! Thanks!
1. Bullitt rear calipers, because I think the rotor size is the same. Is there really any difference between these rear calipers and the stock GT ones?
2. Re-manufactured Cobra calipers, because I can get them from AutoZone for about $10/caliper more than the GT calipers. Will these fit the stock rotors? I'm not sure of the actual rotor size on my car.
Any other suggestions/opinions would be greatly appreciated! Thanks!