Need piston ring recommendations

[Green Machine]

Replaced the oem valve covers with some oem Cobra vc's on my 94GT daily driver which has ~130k + miles on the block. Found oil in the intake.

This will be an excellent opportunity Mr. Curtis @ Flow Tech to work his magic on a custom ground cam. I'll also plan to replace the timing chain and upgrade the valve springs etc.

So, looks like I'll start with a new set of rings for the pistons, what's your recommendations for a replacement brand ?

Thanks, Dewman

 

[urban96]

the oil in your intake was most likely sucked up by the PCV vavle on the back of the lower intake

i would do a compression test before replacing the rings

 

[Green Machine]

urban96 - Good point ! I'll follow up on that.