• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine Need RMS repair sleeve

  • Thread starter Thread starter evintho
  • Start date Start date Nov 2, 2021

evintho

20+ Year Stangneter
Nov 12, 2003
683
245
73
Santa Rosa, CA.
Nov 2, 2021
#1
  • Nov 2, 2021
  • #1
Anyone have a good part # for the rear main seal repair sleeve. I need to address that issue while the motor is on a stand. I Googled Fel-Pro 16250 and got this. Doesn't look right. Looks like just a rubber O-ring.
Fel-Pro 16250

I went to LMR and searched RMS repair sleeve and got this, which looks correct.
LMR repair sleeve

No way I'm gonna spend $60 for a paper thin piece of SS! Don't need the installation tool when a 4" PVC pipe plug will fill the bill. I'd like to get the Fel-Pro piece but I don't think the 16250 is the correct one. Any help is greatly appreciated!
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,923
10,566
203
polk county florida
Nov 3, 2021
#2
  • Nov 3, 2021
  • #2
Nothing against LMR but that repair sleeve is available in most parts stores for, as you can see, for less money.
 

pats91

15 Year Member
Mar 6, 2007
124
74
48
Gladstone, MO
Nov 3, 2021
#3
  • Nov 3, 2021
  • #3
General karthief said:
Nothing against LMR but that repair sleeve is available in most parts stores for, as you can see, for less money.
Click to expand...
I think most of the cost of the LMR part is the installation tool. Rock auto shows the Fel-Pro Sleeve for $2.91 and the Fel-Pro Install tool for $45.79!

They also have a Victor-Reinz Tool for $28.79.

The Fel-Pro 16250 is the right sleeve, I used one on my car a few years ago. That picture of it in the listing is garbage. The sleeve actually looks like the picture in the LMR link.

EDIT: Rock Auto has several sleeves that included the installation tool for around ~$30. Probably the same part that LMR sells for $60. Like karthief, I don't have anything against LMR, but sometimes they sell parts store grade stuff for a significant markup. Unless it is a ford part or one they reproduce, always price check LMR against rock auto or your local parts store.
 
Last edited: Nov 3, 2021
Reactions: General karthief

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,253
17,937
224
Massachusetts
Nov 3, 2021
#4
  • Nov 3, 2021
  • #4
The fel-pro sleeve picture is the worst picture ever. I used the sleeve, it looks like your expect. Their photo is taken edge on not showing the side profile.

No knock on LMR but most of their items are repackaged parts store items at a large markup. Their customer service is top notch for sure, but they have a 50% markup on many of the parts you can get on autozone or even Amazon.

I bought the Felpro sleeve install tool of Amazon and returned it. The tool I got looked like it was used as well, so I imagine I wasn’t the only one playing the Amazon prime tool rental program.
 

evintho

20+ Year Stangneter
Nov 12, 2003
683
245
73
Santa Rosa, CA.
Nov 3, 2021
#5
  • Nov 3, 2021
  • #5
I just ordered the Fel-Pro 16250 from RockAuto. $7.50 shipped. Thanks everyone!
 

Potomus Pete

I'm still waiting for the fully nude shots
5 Year Member
Mar 7, 2019
3,308
1,223
153
Sarasota Florida
Nov 3, 2021
#6
  • Nov 3, 2021
  • #6
Let us know how it works out..Lots of leaking RMS's around here, including mine. Not enough reviews. If I'm going to go thru all that work it would be nice to have a good chance at success.
 

96pushrod

I think they're a little easier to get off
5 Year Member
May 15, 2018
1,530
871
133
Savannah
Nov 9, 2021
#7
  • Nov 9, 2021
  • #7
evintho said:
I just ordered the Fel-Pro 16250 from RockAuto. $7.50 shipped. Thanks everyone!
Click to expand...
I’ve used that p/n before with success. I was able to install one without the tool, just used a flat piece of phenolic and gently hammered it in, taking care to make sure I was square on it.
 

manicmechanic007

5 Year Member
Sep 26, 2017
2,534
714
143
Roy, Utah
Nov 9, 2021
#8
  • Nov 9, 2021
  • #8
The General is right
Every parts store in town will either have the sleeve or be able to get it cheap
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
176
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
506
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Progress Thread "Alter Ego" White 1993 LX 5.0 5spd
  • idareu
  • Sep 9, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2025
idareu
1969, 1970 mustang heater box repair/replace instructions (no AC)
  • 70mstang
  • Apr 9, 2023
  • Classic Mustang Specific Tech
Replies
0
Views
5K
Classic Mustang Specific Tech Apr 9, 2023
70mstang
V
Engine 1990 GT Manual Transmission - Oil Leak and Water plug
  • Vix
  • Sep 2, 2020
  • Fox 5.0 Mustang Tech
Replies
8
Views
3K
Fox 5.0 Mustang Tech Sep 5, 2020
Vix
V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?