Need some GOOD plug wires

[OrangeMustangGt]

Well guys, I'm having a bit of an issue finding a good set of plug wires. I had tried the accell diy kit, and the wires already burnt.

Here is my situation: I need GOOD quality wires 9mm+ (no cheap autozone, etc junk)....With 90 deg boots that fit our cars....and if they make them, heat proof end boots.

Every ford boot is an angled end, and i NEED 90 deg ends or it will hit my headers/downpipes.

The only thing i can find local is the MSD superconductor 8.5mm DIY kit....Which i believe has 90 deg boots.....However I'm shying away from them because i don't know how heat resistant the boots/wires are.....plus a fitted set i think would hold up better


Anyhow....Anyone that could help would be greatly appreciated

 

[blksn955.o]

Are FMS wires 90* boot? I thought they were?

I have had great results from FMS wires, Several of my buddies have as well on several fords.

 

[FlyBy763]

Livewires....the whole wire is burn proof. Mine are sweet!

 

[urban96]

i have the msd's on mine and seem to be holdin up good, 90 deg boots. you could always add those little heat shield things summit sells to the boots

 

[Pennywise2]

MSD plug wires

 

[OrangeMustangGt]

ok guys, thanks. I think i may go with the 8.8 msd's because i can get the kit at autozone...but it is $100..I hope its nice.

 

[HISSIN50]

One thing about some MSD's - I have SC's on the 94 and some of the wires are short. In case this might be an issue, I wanted to atleast say something so we could find out more before ya plunk down 100 beans.

Good luck.

 

[fordtech28]

Are FMS wires 90* boot? I thought they were?

I have had great results from FMS wires, Several of my buddies have as well on several fords.

 

[illwood]

One thing about some MSD's - I have SC's on the 94 and some of the wires are short. In case this might be an issue, I wanted to atleast say something so we could find out more before ya plunk down 100 beans.

Good luck.

I don't think he'll have a problem because he's going to buy the DIY MSD kit as opposed to the pre-fitted one.

I kinda like the shorter style wires because they don't droop anywhere.

 

[Therian]

green, I would highly advise you to go with the livewires if you haven't already made your order

 

[Pennywise2]

ok guys, thanks. I think i may go with the 8.8 msd's because i can get the kit at autozone...but it is $100..I hope its nice.

MSD plug wires were the best plug wires I ever put on my car.
They looks great and the fitment was perfect too.
Some good advice is don't shop at autozone those people
are morons and don't know anything.I got my MSD plug
wires from Summit Racing for alot cheaper.

 

[urban96]

ya go to summit