need some head help

lovinthe5.0

New Member
Feb 1, 2009
5
0
0
Iowa
i got an 83 GT and i wanna do some head work to it but i dont know which way to go on it? i know i can stick with the heads on it and get them completely redone, or go with a set of 351 heads and redo those, or go and buy a new set of gt340's or something of the kind. im not sure which route to take, anyone thats got any experience with it or has any good ideas i could use some help. thanks, curtis
 
You mean gt40's.

on a budget you can get some explorer gt40/gt40p heads and run them.

however, you've got a flat tappet block that made 160 hp on a good day at the flywheel.

You're better off yanking the entire engine out and using an 85+ roller motor (not 86 though..bad pistons/heads)

I'd suggest an entire 96-01 explorer motor. Do a search on the topic.
 
yea i did but i dont know which way to go i'm willing to put about a grand into them but whether i should stick with the ones i have or buy the 351w set and rebuild, or go with some brand new ones off the net. i want to make as much power as possible, if its a little expensive thats fine but if i can do damn near the same thing for half the price why not.
 
the cylinders still had crosshatches in it so we left it alone along with the pistons and connecting rods but i got the rotating assembly balanced and put new rings on the pistons. idk the specs on the cam its a lunati i was told its basically what you'd get out of a 351w? then a new intake and carb. I didnt do all that much to it but enough that i dont want to start all over, i figured the heads would be a nice touch to top it off.
 
I have some TW heads for sale, with 1.7 RR (crane) and track heat springs and ARP head bolts and push rods for under a grand.
All fresh and ready to go, just put $ 650 in them.
They may work for you.