Need some help in the 1/4 mile

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#1

• Sep 4, 2004

• #1

I went to the track yesterday and while I have been there before it was my first time with teh stang. I basically ran consisten 15's flat..my best was a 14.9. My best time slip

Temp: 77
Humidity: 85

60': 2.260
330: 6.383
1/8: 9.706
mph: 73.63
1000: 12.548
1/4: 14.914
mph 95.59

now i think my 60' aint too bad..howver my 1/8 time & mph stinks..I launch between 2000 and 3000 varying ..any higher than that and I spin too much...the more i spun though the better my 60' was...also I shifted at around 5500 at first few runs but by that run 6000...I dont get why my 1/8 is slow witha decent 60' I feell like I am shifting very fast..

 

stangman

15 Year Member

Jul 10, 2003

2,690

10

69

in a 3 bed, 2 bath

Sep 4, 2004

#2

• Sep 4, 2004

• #2

where were you racing at & what was the elevation of the track

 

B

BluThnder99

New Member

Aug 29, 2003

201

0

0

St. Louis

Sep 4, 2004

#3

• Sep 4, 2004

• #3

I have seen alot of guys in STL run 14.8's-14.9's in newer gt's. Is it an auto or 5 speed? If its an auto just work on those launchs and keep the pedal to the floor. I have a auto and my best is a 14.4.

 

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#4

• Sep 4, 2004

• #4

5 speed...englishtown elevation 86 feet

 

zgarske1038

Member

Dec 7, 2003

222

0

17

Hilton Head Island, South Carolina

Sep 4, 2004

#5

• Sep 4, 2004

• #5

my best 1/8th was a 9.729 at 77.05 mph but thats cuz i cant drive on the track worth a damn

 

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#6

• Sep 4, 2004

• #6

youre mph at that point is higher than my

 

crew_dawg16

New Member

Apr 25, 2004

445

0

0

DeKalb, IL

Sep 4, 2004

#7

• Sep 4, 2004

• #7

I dunno, you are running almost identical to me and I am at 3600 ft elevation. My times were before the gears. You get a better 60ft than I do. Do you power shift? Or just normal, aggresive shifting?

Here are my times from Roswell @3600 Ft elev.

60 ft 2.385
1/8th 9.741
mph 74.619
1/4 14.898
mph 94.873

It might be your shifting, at a lower altitude you should be pulling harder than me on top end.

 

GTn00b

New Member

May 25, 2004

175

0

0

Independence, MO

Sep 4, 2004

#8

• Sep 4, 2004

• #8

I've got an auto and its running a consistent 14.6@96 mph. I was running 15.0 the first couple times I ran it but then dropped to 14.6 I'm waiting for it to cool down and I'm gonna take it back down there and run her again before I get the giggle juice and slicks

 

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#9

• Sep 4, 2004

• #9

yea i dunno what's up

Do you power shift? Or just normal, aggresive shifting?

Click to expand...

Im shifting aggressively and I do not think I am a slow shifter...Ihave tried both shifting at 5500 and 6000 from 1stto 2nd and 2nd to third and i ride out 3rd thru the finish...I don't get it my 60' times are better than these guys for ex

http://forums.stangnet.com/showthread.php?t=497230&highlight=1/4

http://www.corral.net/forums/showthread.php?t=533324

its seems when I get to 330 and 1/8 my times suffer could I be spinning too much and getting a decent 60' but affecting the times later on?

 

K

KickerStang

Founding Member

May 6, 2002

593

0

0

Colorado Springs

Sep 4, 2004

#10

• Sep 4, 2004

• #10

First off all, you need to be powershifting to get better times. Second of all, your tach might be off and you might have to shift higher than 6000RPMs. Third of all, you need to get your car dynoed to see exactly what RPM your peak TQ is at and find out if your car is making the power it should be making. Once you find out where your peak tq is at, you need to practice your shifting so you land at your peak tq after shifting. For instance, if you shift at 5500RPMs from 1st to 2nd, and your tach lands at 3800RPMs that is too low. Typically, your peak tq will be at 4100RPMs or thereabouts. So you know you need to shift at a higher RPM or faster. Good luck. It just takes practice. Also, if you notice that your 60's get better as you spin your tires more, then spin your tires more until you are happy with your 60's. It just takes practice.

 

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#11

• Sep 4, 2004

• #11

to the tach might be off thing...to see if its right i figure rev it to the rev limiter...what is that on 03 gt's?

 

S

SLVRGTCONV

New Member

Jun 5, 2004

12

0

0

Sep 4, 2004

#12

• Sep 4, 2004

• #12

i saw you yesterday tat the track. my best time was a 13.18 and then they threw me out for not having a roll bar. what a joke. practice makes perfect when you race....you will get the hang of it

 

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#13

• Sep 4, 2004

• #13

were you the silver GT in lane two...I saw it there when there was still only a few cars there....see my friend was getting worst 60' than me and still running about the same...

also there was so many Cobra's there running real good..I bought my Gt with the bumpers etc I bet ppl were wondering why the CObra was runnin low 15's lol

 

R

Ryan L

Founding Member

Apr 15, 2001

783

0

16

St. Augustine, FL

Sep 4, 2004

#14

• Sep 4, 2004

• #14

Oh great. Now people think 03/04 Cobra's run 15-second 1/4-miles. Please tell me you don't have Cobra badges.

 

N

NewbStang

New Member

May 31, 2003

213

0

0

Sep 4, 2004

#15

• Sep 4, 2004

• #15

no i dont have Cobra badges chief...I bought my car salvage and the shop who fixed it put Cobra parts on it from a flooded 03 cobra..it ahd cobra badging too but i put ocean emblems on instead.Im sure they dont think Cobras run 15's since there was like 6 of em there...maybe just think one guy cant drive his Cobra...but if they do good theyll find out the hard way once they come across one on a stoplight

 

kah9911

New Member

May 20, 2004

102

0

0

Downingtown, PA

Sep 5, 2004

#16

• Sep 5, 2004

• #16

Well it just sound like you need practice. the first time at the track my best was a 14.9 but i got her down to a 14.223 stock and now its down to 14.013 with just pulleys. lower your rear tires to 25 and that should help on your launches. Also the best 60' i have ever cut was 2.195. Good luck with the times.

 

S

SLVRGTCONV

New Member

Jun 5, 2004

12

0

0

Sep 5, 2004

#17

• Sep 5, 2004

• #17

Yes my car was in lane # 2. I was one of the first cars in the lane. If people think the cobra's run 15 sec then they are stupid.Good luck with yopur car and have fun at tthe track . I wont be back until i figure out my rollbar situation..