Need this 1 bolt to finish car!

[PBullitt3255]

Hey guys, I have recently received my engine back from being built, pretty much all of it is back together except the idler pulley and belt. I just need the idler pulley bolt and I would be able to finish the car today. I have a 2001 Bullitt GT and I need the upper idler pulley bolt, I have a pic below. I has a 9.8 on the bolt and is about an inch & half long. If anyone can tell me the part number or name so I can go to my local advanced it would be much appretiated!

 

[txredgt]

Call Late Model Resto and I bet they can figure it out. If nothing else you might be able to mail that one to them and have them match it with a ford piece. You could also try going to your ford dealership and seeing what they tell you.

 

[Noobz347]

Hit the HELP section at your local parts store. If not exact, you should be able to find a close alternative.

 

[GDawg]

Looks like a 20 pitch thread. 9.8 is the metal strength. It's probably a 10mm or 11mm...

 

[jonbacon]

you shoudl be able to go into like advance or autozone and they have a peicethat you can screw it in to which tell you the exact size thread..willtake you 20 seconds..

 

[trombonedemon]

Now what is in the car's engine?rubhands:eyebrow: