• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need to freshen up short block?

  • Thread starter Thread starter ironhead498
  • Start date Start date Dec 20, 2011

ironhead498

Member
Dec 6, 2008
39
0
6
Dec 20, 2011
#1
  • Dec 20, 2011
  • #1
The short block in question has 90,000+ miles on it, and has two cylinders that the rings are shot in.

The combo is TFS h/i/c, 70mm turbo making 11 psi. It made 507hp and 497ftlb to the wheels with a Bob Kurgan tune at his shop.

I know I'm going to hear the whole "buy a good block" shpeal, but it's not realy in the funds.

I was just thinking of buying some new forged pistons (the ones in the block now are cast...lol) and punching the block out .030, new berings and call it good.

What do you think???????????
 

stdyhand

Member
Nov 28, 2011
62
0
6
Missouri
Dec 20, 2011
#2
  • Dec 20, 2011
  • #2
You can get away with using the stock block as long as you don't put it to the floor very often. Your making 500+ hp so your right at the limit already. You can only do what you can afford. The Forged pistons might be better against detonation but they aren't going to keep that block from coming apart.

I just wouldn't "drive it like you stole it" as some like to say. Have fun but keep it within its limits.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Dec 21, 2011
#3
  • Dec 21, 2011
  • #3
If you insist on sticking with the stock block, then I'd be pulling a lot of ignition timing out of that engine to keep it alive. That, and/or some lower than stock compression pistons to help ward off detonation. You might give up 30-40hp, but it's better than picking up pieces of your engine all over the road one night you can't resist the urge to push it.
 

2vNotch

Active Member
Dec 6, 2011
519
21
29
Rogers, AR
Dec 21, 2011
#4
  • Dec 21, 2011
  • #4
+1
 

ironhead498

Member
Dec 6, 2008
39
0
6
Dec 21, 2011
#5
  • Dec 21, 2011
  • #5
Bob set the tune with 19* total advance if I remember corectly. When he put it on the dyno I told him that it was a high milage cast piston short block. He said that he wasn't worried about that and once he hit 500 he would call it good. Four pulls later and he was done. The car drives great and I've put about 2k miles on it since with no problems.
I know it's still on borrowed time, but I'm a firm believer in the "if it's no broke don't fix it".
I'm sure even if I just do a 306 rebuild that I'd need to turn the boost down a little to keep it alive.
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
900
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
P
Thoughts on this odd (smog legal) combo?
  • PJV9126
  • Feb 8, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 16, 2023
91AOD5.0LX
R
Electrical Hard to Start, Rough Idle, Won't Rev Up/Barely Any Power to Drive
  • rdmcalli
  • Dec 5, 2021
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
7K
Fox 5.0 Mustang Tech Sep 3, 2022
Mindseye007
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?