• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need traction

  • Thread starter Thread starter watchdogfour
  • Start date Start date Nov 25, 2008

watchdogfour

New Member
Nov 11, 2008
49
0
0
bgky
Nov 25, 2008
#1
  • Nov 25, 2008
  • #1
i got my motor done and tuned it made 360rwhp and 400tq now i have no traction what so ever any suggestios on what i can do that wont cost a fortune on a 91 gt.should i stay with 4 lug or go five?what kind of tire should i use on a daily driver.once agin guy thanks for any info.
 

87foxstang

Member
May 10, 2007
0
0
16
Cromwell, CT
Nov 25, 2008
#2
  • Nov 25, 2008
  • #2
you can go 5 lug, it can be done relatively cheap by using junk yard parts. but thats another topic.

as far as traction for the street, get some upper and lower rear control arms, I assume you have stock suspension since you didnt say other wise...if stock, get some good shocks/struts/springs to go with the CA's.

Subframe connectors will also help you out.

drag radials will do wonders. since your using it for a DD you should consider a decent wearing drag radial such as the nitto 555r.
 

watchdogfour

New Member
Nov 11, 2008
49
0
0
bgky
Nov 26, 2008
#3
  • Nov 26, 2008
  • #3
.

sounds good thanks for the info
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Nov 26, 2008
#4
  • Nov 26, 2008
  • #4
Adjustable upper and lower control arms, good shocks/struts and a set of tires and it should hook pretty good.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Nov 27, 2008
#5
  • Nov 27, 2008
  • #5


two of these should help a little...
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Nov 27, 2008
#6
  • Nov 27, 2008
  • #6
36 lug swap ftw!!!
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Nov 27, 2008
#7
  • Nov 27, 2008
  • #7
like stated above control arms and shocks/struts and maybe drag springs if you really into straight line. some good tires should help you out some.

but honestly once you get to a certain power level, you're going to spin the tires on the street no matter what you do.... just need ease into the gas in the lower gears, give it as much as you can without spin. keep the tires right on the edge of spinning. thats the best you'll be able to do.


if at the track, get come slicks nice a hot and give it all you have. it should hook awesome on a well prepped track.
 

watchdogfour

New Member
Nov 11, 2008
49
0
0
bgky
Nov 27, 2008
#8
  • Nov 27, 2008
  • #8
.

what about the four lug axles will they hold up pretty good or am i waisting my money getting four lug draglites the reason i ask i know where i can get a set for a good price but will the axles handle a take off on slicks?
 

watchdogfour

New Member
Nov 11, 2008
49
0
0
bgky
Nov 27, 2008
#9
  • Nov 27, 2008
  • #9
..

any know a good drag radial that will last?
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Nov 27, 2008
#10
  • Nov 27, 2008
  • #10
don't expect the control arms to do anything for traction. I know this from experience on more than one fox.

the above poster is right, once you hit a certain power level, the ONLY thing on this planet that's gonna help you is running a full time drag radial. At that point, I hope you don't drive the car, as you'll be replacing them once a year or so if you do drive a lot.

the 4 lug axles are fine, but I'd upgrade to a 31 spline setup. If you don't, with that much power you'll brake eventually if you're running sticky tires.

be sure you have weight transfer too. If you're lowered, or your suspension is too tight, you'll spin all day no matter what.

Good adjustable struts on the front end can help towards dialing in some give when you need it. My bro is running only 237 at the wheels, but he's got a lowered h&r suspension, and still spins at the track even with et street tires.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
85
Views
4K
Fox 5.0 Mustang Tech Oct 6, 2026
jaygee15
J
D
Will 2023 (Non-Handling Pack) Mach 1 Wheels Fit A 2013 Mustang GT OK?
  • dmw_4814
  • Oct 27, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
117
2010 - 2014 Specific Tech Oct 27, 2026
dmw_4814
D
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
439
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
494
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?