New(?) aluminum Dart heads flowing 260!!

[homerojr]

I´ve heard (Ford muscle magazine) about Dart aluminum heads, for street small block, at 170cc and 1.94 1.60 valves, flowing [email protected]. Is it for real? Anybody has flowing charts or any experience with those heads? These are bolt-on heads? Maybe a better and cheaper alternative to the famed but expensive AFRs..

 

[SuperDust22]

TTT

Does anyone know about these?

Dustin

 

[Grn92LX]

When was the last time you saw a flow bench go down the track?

 

[SuperDust22]

When was the last time you saw a flow bench go down the track?

???????

 

[homerojr]

Never, but I saw a flow bench hitting someones monitor recently. Maybe some of you don´t know every performance part, heads in this case, before going down the quarter at 13´s,12´s ,whatever, has to face thorough research at the labs and comparison tests to get improvement. That´s how science works, and car enthusiasts use to know that.

 

[302fordracer]

ouch that sounded like a burn

 

[Joes95GT]

When was the last time you saw a flow bench go down the track?

It's been atleast a few months...

DART makes a good product, there is no doubt in my mind about that, however, I also believe that they are a sponsor of MM&FF....

Joe

 

[SuperDust22]

Any links to the heads he was talking about???

Dustin

 

[Grn92LX]

It's been atleast a few months...

DART makes a good product, there is no doubt in my mind about that, however, I also believe that they are a sponsor of MM&FF....

Joe

I wasn't knocking the dart heads at all. I was just trying to get it stuck in peoples head that its NOT all about big fancy flow numbers. You know this as do I, but many don't.

Lets see what I can do with a junk, unported, tiny, under $1000 Twisted Wedge head

 

[dstanggt50]

I would assume they are good heads, dart makes good products from what I've read about. I think either mm&ff or 5.0 did a test on a 347, they said it made the most power at that time. ( I think the frpp z304 heads were on it before??). I was looking into them for future upgrades if I ever get enough money for my vortech, but I haven't read anything esle about them, don't know if a lot of people use them.

 

[urban96]

my flow bench runs 13's all day

 

[SuperDust22]

Still any links to them. I just want to look at them.

Dustin

 

[Grn92LX]

A quick yahoo search would have saved stangnet some bandwith

http://www.dartheads.com/fordch.aspx

 

[dart347fox]

I am currently running the 195 cc as cast heads , actualy just finished the build up and am happy to report that the quality and fitment of thes heads was excelent , dart has recently set up a fourum on their website . We are trying to round up some more of the guys who are running these to get some feedback so stay tuned!

 

[bimmertech]

I´ve heard (Ford muscle magazine) about Dart aluminum heads, for street small block, at 170cc and 1.94 1.60 valves, flowing [email protected]. Is it for real? Anybody has flowing charts or any experience with those heads? These are bolt-on heads? Maybe a better and cheaper alternative to the famed but expensive AFRs..

i've gotta say that the exhaust flow is less than stellar, around 65% on both heads which could really hurt you blower guys, that's if my math is right cuz after all i'm pretty retarded. anyway just something i noticed. oh btw they didn't post any mid lift numbers and thats why afr's are so expensive.