• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

New Bumper, so new pics!

  • Thread starter Thread starter KBExperience
  • Start date Start date Jan 14, 2010
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Jan 16, 2010
#21
  • Jan 16, 2010
  • #21
Na, forget the cams. Get an intercooler sitting down there, and a little something to blow air through that intercooler.

Looks great!
 

Red35th

Member
Apr 18, 2003
609
2
19
Houston, TX
Jan 16, 2010
#22
  • Jan 16, 2010
  • #22
KBExperience said:
and i'm SO not going to drill into that bumper
Click to expand...

I don't want to advise you to break the law, but... I've have never put a front plate on my car and have also never been hassled about it. Have you ever been pulled over for not having one?

A few of my friends with GTs also don't have front plates and similar story.
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 16, 2010
#23
  • Jan 16, 2010
  • #23
Red35th said:
I don't want to advise you to break the law, but... I've have never put a front plate on my car and have also never been hassled about it. Have you ever been pulled over for not having one?

A few of my friends with GTs also don't have front plates and similar story.
Click to expand...


well, here in Houston, they will pull you over for not having one, especially in Jersey Village, my neighborhood.. and if you get pulled over for something else, 99% of the time, they will ticket you for the plate too.

but on the other hand, if you get ticketed and you put it on, they will dismiss the ticket
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 16, 2010
#24
  • Jan 16, 2010
  • #24
sneaky98gt said:
Na, forget the cams. Get an intercooler sitting down there, and a little something to blow air through that intercooler.

Looks great!
Click to expand...

ha, i wish..

:/
 

Sonic04GT

Member
Nov 1, 2009
844
2
19
West Palm Beach, FL
Jan 16, 2010
#25
  • Jan 16, 2010
  • #25
Damn, makes me want a Cobra bumper for my car.
 
N

ninjastang125

New Member
Nov 1, 2008
591
2
0
maryland
Jan 16, 2010
#26
  • Jan 16, 2010
  • #26
zip tie the tag to the bumper where the gap is
 

Ateup

Active Member
Sep 21, 2009
748
2
28
Jan 16, 2010
#27
  • Jan 16, 2010
  • #27
ninjastang125 said:
zip tie the tag to the bumper where the gap is
Click to expand...

I need a pic of this setup to see just how awesome that would look.
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 16, 2010
#28
  • Jan 16, 2010
  • #28
ninjastang125 said:
zip tie the tag to the bumper where the gap is
Click to expand...

lol

that would look horrible

Ateup said:
I need a pic of this setup to see just how awesome that would look.
Click to expand...

 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Jan 16, 2010
#29
  • Jan 16, 2010
  • #29
Looks good!

You can get the Cobra chin spoiler if you want. They are around $90 shipped from Tousley Ford.

For a bracket I highly suggest Craigs Custom Bracket! It goes on in a matter of seconds with NO drilling. I have one for my car. It only takes like 10 seconds to take off at car shows or other gatherings so it's nice.

http://www.ccmustangbrackets.com/brackets.html
 

PULMEOVR

I need a bigger E-Penis.
Sep 29, 2003
560
0
27
Ottawa, Ontario Canada
Jan 17, 2010
#30
  • Jan 17, 2010
  • #30
Looks good! I agree it looks abit odd with the chin spoiler, but I'll take your word for it that it looks good in person.
 

mustanggirl666

New Member
Apr 22, 2009
8
0
1
Connecticut
Jan 19, 2010
#31
  • Jan 19, 2010
  • #31
KBExperience said:
Well I got the bumper on eBay, painted for 250, the fogs were 70.. the bezels and pigtails were 60, the chin spoiler and delete kit were 160 so about 550$ total?
Click to expand...

Hey Looks very nice I love that bumper! I am wanting to buy one in March for mine do you possibly have any links to some of the things above? I cant seem to find a bumper painted for under $400 and I have no idea where to get the delete. Thanks so much!
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 19, 2010
#32
  • Jan 19, 2010
  • #32
mustanggirl666 said:
Hey Looks very nice I love that bumper! I am wanting to buy one in March for mine do you possibly have any links to some of the things above? I cant seem to find a bumper painted for under $400 and I have no idea where to get the delete. Thanks so much!
Click to expand...

Bumper: I made an offer of 250 and they accepted it

http://cgi.ebay.com/ebaymotors/2003...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Foglight Bezels, fogs and pigtails

Mustang 03-04 Fog Light & Bezel Kit, Cobra at LRS - Same Day Shipping!


^ I bought all those items seperately and saved about 20 bucks



Grille Delete and Chin Spoiler came from AmericanMuscle.com

 

mustanggirl666

New Member
Apr 22, 2009
8
0
1
Connecticut
Jan 19, 2010
#33
  • Jan 19, 2010
  • #33
KBExperience said:
Bumper: I made an offer of 250 and they accepted it

http://cgi.ebay.com/ebaymotors/2003...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Foglight Bezels, fogs and pigtails

Mustang 03-04 Fog Light & Bezel Kit, Cobra at LRS - Same Day Shipping!


^ I bought all those items seperately and saved about 20 bucks



Grille Delete and Chin Spoiler came from AmericanMuscle.com

Click to expand...

thank you so much!

that's awesome that they accepted $250 do you think if i do it they would accept it? how does it fit? is the paint look good no flaws?

what Piece grille delete did you get?

I keep seeing posts that say you can't use the one off AM and then people saying you don't even need one or you need the 2 piece / 3 piece I am very confused sorry for all the questions i been searching for days trying to look for all this information but no luck and nobody on other sites answered me fully
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 19, 2010
#34
  • Jan 19, 2010
  • #34
the paint was flawless.. You have to drill out the rivets on the brackets on the sides of the old bumper and bolt them on to the new bumper.

I bought th 2 piece grille delete kit and had to dremel out the radiator cover behind the grille.. for an extra 30 dollars you can buy this piece with the hole already in it. The grille delete kit fits just fine.
 

mustanggirl666

New Member
Apr 22, 2009
8
0
1
Connecticut
Jan 19, 2010
#35
  • Jan 19, 2010
  • #35
KBExperience said:
the paint was flawless.. You have to drill out the rivets on the brackets on the sides of the old bumper and bolt them on to the new bumper.

I bought th 2 piece grille delete kit and had to dremel out the radiator cover behind the grille.. for an extra 30 dollars you can buy this piece with the hole already in it. The grille delete kit fits just fine.
Click to expand...

okay ah I want one right now, it looks amazing on your stang ! Thanks for all the information!

Whats the $30 piece look like?
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 19, 2010
#36
  • Jan 19, 2010
  • #36
When you buy the grille delete look under the price, there is an option to add the piece.. It looks exactly like the old one except for the hole cut in the middle for the pony
 

mustanggirl666

New Member
Apr 22, 2009
8
0
1
Connecticut
Jan 19, 2010
#37
  • Jan 19, 2010
  • #37
KBExperience said:
When you buy the grille delete look under the price, there is an option to add the piece.. It looks exactly like the old one except for the hole cut in the middle for the pony
Click to expand...

I see the difference I just checked it out on the AM site. You have that bottom piece i think its called the frame does it sit flush with the bumper? you have helped me out so much thank you very much.
 

Ateup

Active Member
Sep 21, 2009
748
2
28
Jan 19, 2010
#38
  • Jan 19, 2010
  • #38
I bought the complete 3 piece delete kit from AM. Got it in a couple days and had it installed in 15 minutes. Every 99-04 Mustang should of had it from the factory. Haven't seen a Stang yet that didn't look waaaaay better with it installed.
 
9

95.0Stang

Member
Feb 20, 2003
538
1
18
Kansas
Jan 19, 2010
#39
  • Jan 19, 2010
  • #39
KBExperience said:
the paint was flawless.. You have to drill out the rivets on the brackets on the sides of the old bumper and bolt them on to the new bumper.

I bought th 2 piece grille delete kit and had to dremel out the radiator cover behind the grille.. for an extra 30 dollars you can buy this piece with the hole already in it. The grille delete kit fits just fine.
Click to expand...

How long did it take to get yours?

Now sure why but I offered $200 for one last night and won it so I am pleased with that. I hope it comes quickly or at least before Spring!
 

KBExperience

Active Member
Jun 21, 2009
466
1
49
Houston
Jan 19, 2010
#40
  • Jan 19, 2010
  • #40
95.0Stang said:
How long did it take to get yours?

Now sure why but I offered $200 for one last night and won it so I am pleased with that. I hope it comes quickly or at least before Spring!
Click to expand...

it takes about 3 weeks.. they gotta paint it.. then send it to ya
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

J
Front neoprene front bumper painted color of my 71 Mach1 some hair line cracks
  • JJHstang
  • May 25, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
73
1965 - 1973 Classic Mustangs -General/Talk- May 30, 2026
Mcmahst
P
Hello, core supports for '86 vs '90-3, i need some answers if anyone knows
  • Pony Dr.Mike
  • Mar 14, 2026
  • The Welcome Wagon
Replies
7
Views
286
The Welcome Wagon Mar 15, 2026
95steedamustang
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
62
1965 - 1973 Classic Mustangs -General/Talk- Today at 9:21 AM
SchwarzStock
C
2003 Mustang GT - Rear Tire Size Question
  • Cassiebaebae
  • Jun 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
38
Views
813
1996 - 2004 SN95 Mustang -General/Talk- Jul 6, 2026
Cassiebaebae
C
305-45-17 tires on Pony wheels (17")?
  • TTSaleen
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
469
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 1, 2026
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?