• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

new engine help

  • Thread starter Thread starter 86mustang5.oh
  • Start date Start date Mar 23, 2006

86mustang5.oh

New Member
Apr 5, 2005
125
0
0
battle creek mi.
Mar 23, 2006
#1
  • Mar 23, 2006
  • #1
im gettin a new engine its a 88 5.0 out of a mark8 and i was wondering should i get it balanced i plan on putting som epretty good power into it and i was wondering if you geuss recomend balancing?
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Mar 23, 2006
#2
  • Mar 23, 2006
  • #2
Well, take my advice.... i did all the mistakes first, and now have a decent motor going together...

Take the short block apart. take it to the machine shop. have them hot tank it, then have them mic the cylinders to check the wear. this will let you know if you need to bore or hone it. (mine was worn 19 thousandths at the worst part, thats why i just decided to go .030 over)

Things to ask yourself:

What is your budget?

Decide on what you might do with the motor in the future....

Are you going to want more low rpm grunt, high rpm horsepower, or both?

Kinda need more details as far as what you want to do with the motor, then we can go from there.

I just learned that balancing goes this way (from worst to best)

1. balanced externally at 50oz
2. balanced externally at 28oz
3. balanced internally (neutral balancing)
 
9

93 331 GT

Member
Mar 5, 2006
60
0
7
Jackson, NJ
Mar 23, 2006
#3
  • Mar 23, 2006
  • #3
The mark 8 is a non-H.O. 5.0. you should FarBeyondDriven's advise and take the block apart. You said you want serious power, ditch everything inside. There are no goodies inside. those motors are built for cruising not horsepower. Check the heads, if they are not E-7's (which I don't believe they are) get those out of there too. Balancing, Neutral could cost you about 200 dollars. Some cranks (like Scat) come balanced for 28 oz. components, so when you buy your fly wheel and balancer make sure they are 28 oz. 50 is stock. Hope this helps
 

86mustang5.oh

New Member
Apr 5, 2005
125
0
0
battle creek mi.
Mar 23, 2006
#4
  • Mar 23, 2006
  • #4
it says 5.0(ford)ho on the intake
the guy im buying it from said it was an ho
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
518
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
382
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
600
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
383
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?