• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

new engine=new problem, help!

  • Thread starter Thread starter mustanghunter50
  • Start date Start date Jun 14, 2006

mustanghunter50

New Member
May 30, 2006
123
0
0
easton pa
Jun 14, 2006
#1
  • Jun 14, 2006
  • #1
i put a reman 5.0 in my car a few weeks ago. the motor starts fine and runs real well, but i can tell the timing is off a little bit. we put a gun on it and where it should be, the car wont start, so i turned it a little to the right, around 1230-1 oclock. the car runs well, but after a while when it's at normal running temp, if i put it in neutral, the car will die. it starts right back up, and i have to feather the gas to it doesnt stall. anyone have any ideas?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 14, 2006
#2
  • Jun 14, 2006
  • #2
Is the IAC clean?

Any chance the balancer spun?

Good luck.
 

mustanghunter50

New Member
May 30, 2006
123
0
0
easton pa
Jun 14, 2006
#3
  • Jun 14, 2006
  • #3
the balancer didnt spin- but whats the iac?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 15, 2006
#4
  • Jun 15, 2006
  • #4
idle air control its on the side of the Throttle body
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 15, 2006
#5
  • Jun 15, 2006
  • #5
are you checking the timing with the spout conector out?
 

mustanghunter50

New Member
May 30, 2006
123
0
0
easton pa
Jun 15, 2006
#6
  • Jun 15, 2006
  • #6
no, i'm not- because i don't know what the spout connector is, haha, will that make a difference?
 

mustanghunter50

New Member
May 30, 2006
123
0
0
easton pa
Jun 15, 2006
#7
  • Jun 15, 2006
  • #7
oh alright- its the plug on the wire that goes to the distributor- thats what i thought what should my timing be set at?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 15, 2006
#8
  • Jun 15, 2006
  • #8
Info for cleaning the IAC.

Info for setting timing.

Set your timing first and the other issue very well might fix itself (If you tried to get down to 14* or so with the SPOUT in, you retarded the timing so much that it will try to stall). Nice catch 86 BC.
Good luck.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jun 15, 2006
#9
  • Jun 15, 2006
  • #9
mustanghunter50 said:
no, i'm not- because i don't know what the spout connector is, haha, will that make a difference?
Click to expand...


now thats funny....
 

mustanghunter50

New Member
May 30, 2006
123
0
0
easton pa
Jun 17, 2006
#10
  • Jun 17, 2006
  • #10
what degree should stock timing be at?
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Jun 17, 2006
#11
  • Jun 17, 2006
  • #11
10 degrees
 
You must log in or register to reply here.

Similar threads

D
rpm goes up - car does not speed up.
  • dawakbar
  • Oct 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
152
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 27, 2026
nickyb
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
606
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
411
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
247
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?