New Exhuast setup is done, almost!

Bosko5.0 · Jan 24, 2007

BBK ceramic Lontubes
BBK custom offroad Hpipe with cutouts
stock catback
no smog stuff

well i get all the wires run and tightened down every thing and fired it up, DAM it sounds so good a couple of leaks but i can fix that the egr tube is leaking at the egr got to bend it some more, i found a rotted out grommet for the antenna thats right where water pours down from the hood so that might be why my floor was wet. but i love the way it idles lumpy

Are the headers suppose to smoke since they are new?
do i need to retorque all the bolts after its been run a while, since i have stage 8 locking bolts and copper gaskets?

Ill try and get sound klips tommorow its dark here and I dont want to wake everyone up

final5-0 · Jan 24, 2007

New exhaust stuff smoking on first fire up is normal

Yes ... after a couple of heat cycles ... snug up all bolts

Grady

BlackVert · Jan 24, 2007

no mufflers?

red95gtconvert · Jan 24, 2007

From my experience it is better to do a few heat cycles/retorques on the header bolts before putting the locks over the bolts. I'll bet it sounds killer

Bosko5.0 · Jan 24, 2007

its got stock mufflers,

heck yeah it sounds killer

the smoke i figured its normal but i just wanted to make sure
I think i did good I still have all fingers and toes

heres some pics

heres my wideband O2

heres my speedcal

I just removed all the wires here they got in the way!

heres the only thing I am worried about the exhust rubbing the shifter linkage

New Exhuast setup is done, almost!

Bosko5.0

Active Member

final5-0

Mustang Master

BlackVert

red95gtconvert

New Member

Bosko5.0

Active Member

Attachments

Similar threads

New Exhuast setup is done, almost!

Bosko5.0

Active Member

final5-0

Mustang Master

BlackVert

red95gtconvert

New Member

Bosko5.0

Active Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency