• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

New mota time!

  • Thread starter Thread starter DMAN302
  • Start date Start date Jun 18, 2004

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Jun 18, 2004
#1
  • Jun 18, 2004
  • #1
196000 miles is not too bad in my opinion...according to my exhaust a full throttle it is time for new rings in a real bad way..oh well it was planned for this fall anyways,just hope she can hold together. Anyhow my question is cam related..I have a fresh short block soon in the works as stated above and a set of AFR 165's with upgraded springs on the way..my question is what is a good streetable cam with good idle to use with 1.6RR's I don't do track ventures so it will be strickly for the street.. I love low end torque and want power from 1000rpm to 5000-5500 which is where I spend most my time.FTI is not an option due to price when exchange and duty is included..I prefer a self cam.
 
M

mackey

Active Member
Jan 25, 2003
1,284
1
38
Beverly, Massachusetts
Jun 18, 2004
#2
  • Jun 18, 2004
  • #2
anything around 490s lift int and exhaust. Here are a few choices.

I would go with steeda #19. Most people like it

1.Stock 5.0 E8ZE-6250-CA, Valve Lift Intake w/1.6 rockers-.444,
Valve Lift Exhaust w/1.6 rockers-.444, Duration Intake (at .050)-204, Duration Exhaust (at .050)-204, Lobe Center-116, Emissions Legal-Yes

3.Lunati 50017, Valve Lift Intake w/1.6 rockers-.500, Valve Lift Exhaust w/1.6 rockers-.510, Duration Intake (at .050)-218, Duration Exhaust (at .050)-226, Lobe Center-112, Emissions Legal-No

4.B303, Valve Lift Intake w/1.6 rockers-.480, Valve Lift Exhaust w/1.6 rockers-.480, Duration Intake (at .050)-224, Duration Exhaust (at .050)-224, Lobe Center-112, Emission Legal-No

5.Crane 2040, Valve Lift Intake w/1.6 rockers-.498, Valve Lift Exhaust w/1.6 rockers-.498, Duration Intake (at .050)-220, Duration Exhaust (at .050)-220, Lobe Center-110, Emissions Legal-Yes

6.Crane 2030, Valve Lift Intake w/1.6 rockers-.533, Valve Lift Exhaust w/1.6 rockers-.544, Duration Intake (at .050)-216, Duration Exhaust (at .050)-220, Lobe Center-112, Emission Legal-Yes

7.Crower 15511, Valve Lift Intake w/1.6 rockers-.468, Valve Lift Exhaust w/1.6 rockers-.486, Duration Intake (at .050)-218, Duration Exhaust (at .050)-224, Lobe Center-114, Emission Legal-Yes

8.Crane 2031, Valve Lift Intake w/1.7 rockers-.513, Valve Lift Exhaust w/1.7 rockers-.529, Duration Intake (at .050)-214, Duration Exhaust (at .050)-220, Lobe Center-112, Emissions Legal-Yes

9.Steeda #19, Valve Lift Intake w/1.6 rockers-.480, Valve Lift Exhaust w/1.6 rockers-.480, Duration Intake (at .050)-220, Duration Exhaust (at .050) w/1.6 rockers-226, Lobe Center-115, Emission Legal-Yes

10.E303, Valve Lift Intake w/1.6 rockers-.498, Valve Lift Exhaust w/1.6 rockers-.498, Duration Intake (at .050)-220, Duration Exhaust (at .050) w/1.6 rockers-220, Lobe Center-110, Emissions Legal-Yes
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Jun 18, 2004
#3
  • Jun 18, 2004
  • #3
I am fond of the crower 15511 and heard lots about the E303, well still have time to look it over..another question is about fuel...should I upgrade to a Pro-m75 calibrated for 24 pounders or will my stock fuel set up with 19's serve its purpose with the AFR's and cam.
 
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
308
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
208
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
R
Rcapri - 1980 Capri, bought new by inlaws
  • RCapri
  • Sep 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
910
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 20, 2025
manicmechanic007
H
Drivetrain 4R70W clutch friction/metals/piston set up questions for transmission guru
  • Hizdudeness
  • Apr 4, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
986
Fox 5.0 Mustang Tech Nov 15, 2024
slow84lx
S
Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?