new short block on the way

Adam95GT · Mar 5, 2011

94gt5.o said:
sweet that link helps alot and ive been readin some other fourms and everybody else says that the majority of edelbrock heads do use the stock length. I know this is probly a stupid question but bare with me but what does the cam and push rods have in common sorry lol
But on a side note i got oiling system stuff such as my pan and other goods Just waitin for sunday to put everything on.

Cam lifts the lifters which lift the pushrod which depress the valve.

final5-0 · Mar 5, 2011

94gt5.o said:
sweet that link helps alot and ive been readin some other fourms and everybody else says that the majority of edelbrock heads do use the stock length. I know this is probly a stupid question but bare with me but what does the cam and push rods have in common sorry lol
But on a side note i got oiling system stuff such as my pan and other goods Just waitin for sunday to put everything on.

Go to a few of the big cam builder sites and look at their tech section

When you see the picture ... You'll get the big picture

Pun intended

Grady

final5-0 · Mar 5, 2011

94gt5.o said:
Just waitin for sunday to put everything on.

I forgot the most important part

DO NOT

Just bolt on all your hot rod parts without checking

If something is not like it should be ............
You could do permanent non-repairable damage to your parts

I don't wanna scare you
just
Let you know how important it is to check that stuff

Especially when it involves your valve train :Word:

Again ... ALL that basic stuff can be found on the cam sites

Grady

94gt5.o · Mar 6, 2011

thats it you scared me im sellin it lol but yes so far ive learned CHECK EVERYTHING wish i made more money lol

94gt5.o · Mar 8, 2011

does any body know where i can get a set of oil pan bolts. Or would i be better off just going to my local hardware store?
Im starting to see how much really goes into a motor I mean theres just so many little parts its crazy

revhead347 · Mar 8, 2011

ARP makes an oil pan stud kit. You could go to hardware store too.

Kurt

RIO5.0 · Mar 8, 2011

I'd head to a salvage yard if ones close by, plenty of 5 liters around. Most the OEM bolts have the intergral washers, which work the best...you can clean/paint if you like. You have a complete timing/waterpump set... intake set, VC's ??

Your correct...the little things kill you. I sold my other motor complete and then built a 331... I know your pain...

revhead347 · Mar 8, 2011

I wouldn't want to lay on my back in the sand to pull a few oil pan bolts. If the engine is already pulled, they aren't going let you strip bolts off it anyways; it's the whole engine or nothing.

Kurt

Zero Signal · Mar 8, 2011

Ace is the place

94gt5.o · Mar 8, 2011

any body know what size they are off the top of their head? and are they all the same size.

Zero Signal · Mar 9, 2011

I don't recall the sizes, but there are two in the front and the back that are a size up from the rest. I'm sure someone else can confirm.

revhead347 · Mar 9, 2011

Yeah, most of them are 1/4 x 20 or 24, I can't remember. I'm pretty sure the two in the front and the two in the back are 5/16 coarse thread.

Kurt

94gt5.o · Mar 9, 2011

Have you guys heard of this site I found them today and i found alot of stuff i couldent find any where else. www.EFIMustangparts.com They have tons of arp bolt kits which was what i was looking for

94gt5.o · Mar 15, 2011

Holley Systemax heads SBF, Manley Valves, complete
Holley Systemax heads SBF, Manley Valves, complete
Please wait
Image not available

* Enlarge

Item condition: Used
Compatibility: This information is not available.
Time left: 6d 01h (Mar 21, 201109:33:10 PDT)
Bid history:
0 bids[Refresh bidhistory]
Starting bid: US $485.00
Your maximum bid:
US $
Place bidPlace bid
(Enter US $485.00 or more)
or
Price: US $615.00 Buy It NowBuy It NowBuy It Now

Add to Watch list
Start of panel

* Add to Watch list
* Add to Gift ideas
* Add to Research
* Add to Wish list

Sign in for more lists
End of panel

Returns:
No Returns Accepted
Shipping: $62.00 Standard ShippingSee more services See shipping discounts | See all shipping details
Estimated delivery within 4-8 business days.
eBay shield
NEW
eBay Buyer Protection
eBay will cover your purchase price plus original shipping.
Learn more about eBay Buyer Protection - opens in a new window or tab

Seller info
Member id r302gsq ( Feedback Score Of 471Teal star icon for feedback score in between 100 to 499)

100% Positive feedback
Ask a question
Save this seller
See other items from this seller
Other item info
Item number: 300536626919
Item location: ROSWELL, NM, United States
Ships to: United States
Payments:
PayPal See payment information
Share: this item |Print this item - opens in a new window or tab|Report item
Description Shipping and payment Buying tips
Seller assumes all responsibility for this listing.
Item Specifics
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab... Read moreabout the condition
Part Brand: Holley
Warranty: No Manufacturer Part Number: 300-577
These will fit: 1963-1995 Ford 289, 302, and 351W (exc. Boss 302).

Heads are set up for Roller Cam

Recently serviced with brand new Manley "Race Flo" SS Valves, and new seals and new locks. Never run with new valves.

Valve seats are in great shape, 3-angle valve job done a year ago and new valves were lapped in.

Spring pressure is near new and tested to be 100lbs @ 1.750", 250lbs @1.250", 295lbs @ 1.125". Should easily support 560" lift.

I removed these from my 89 drag mustang with 306ci with turbo. This made 514rwhp though a race prepped AOD.

I am going to a Dart 347 and need a bigger head.

These are great heads and match up great with the Holley systemax intake.

Please check fitment for your application. Heads are sold as is.

please give me sum feed back i want to buy asap if you guys think its a good deal.

Zero Signal · Mar 15, 2011

I think we need some context there. Looks like an ebay posting

An explanation and a link would be best.

94gt5.o · Mar 15, 2011

Oh geez i dident relize what i posted yes it is an ebay post i did this as i was racing out the door to work haha i can not post a link here at my works computer not sure why. all i did was type in sbf heads and they where on the first page.

94gt5.o · Mar 16, 2011

so i bought the systemax heads. All rebuilt with better stuff all manley race flo ss valves upgraded springs and locks all assembled for 615 bucks. Ya i know it sounds to cheap but the guy had 100% feedback and all his reviews were perfect so we will see what happens. My cam is still going to stay the same choice comp cams xe270hr with 1.7 roller rockers. The thing is that i just had everything figured out and measured for my pushrods stock size would have worked great with the eddies. I want to know who is running the systemax stuff and what size pushrods they used this would help out greatly. Also the systemax heads are stud mount right

94gt5.o · Mar 17, 2011

anybody

Zero Signal · Mar 17, 2011

Not many people are running Holley heads here. If those heads have been worked over, they may have been decked. You can try the stock rod and see if it just happens to work. If not, pick up a checking rod.

94gt5.o · Mar 17, 2011

mmm really i thought there was a few people with them. But thanks for the reply ill be takin pics when they get here.

new short block on the way

New Member

Mustang Master

Mustang Master

New Member

New Member

Apparently my ex-husband made that mistake.

Apparently my ex-husband made that mistake.

Active Member

New Member

Active Member

Apparently my ex-husband made that mistake.

New Member

New Member

Active Member

New Member

New Member

New Member

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency