• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Newbie questions about '85 models

  • Thread starter Thread starter JZieran
  • Start date Start date Jun 14, 2004
J

JZieran

New Member
Jun 14, 2004
1
0
0
Walden,NY
Jun 14, 2004
#1
  • Jun 14, 2004
  • #1
Hi everybody, I just bought an '85 5.0 LX Notchback with the TBI injection and AOD trans. The car already has long tubes, x-pipe, no cats and 2 1/2" flowmasters on it. I want to convert it to a carb. I have some questions about this swap.

1.) Fuel pump: It is my understanding that the TBI system runs about 12-16psi, carbs need 6-7psi, so can I use an adjustable regulator to turn down the pressure to the carb level? If not do I need a electric pump with less pressure, or is there a provision for a mechanical pump?

2.) Distributor: Will I be able to use the stock distrubutor for awhile until I can upgrade the ignition? If not does anybody have any recomendations as to which unit would be a good basic starting point?

3.) Are the '85 motors roller cammed and forged piston like the later ones?

4.) How much power can the AOD and 7.5" take before I have to worry about breakage?

My goal for this car is 11.80-11.60's on a 125 shot. A .60 over 302 shortblock with hyper flattops, nodular crank, good rods and bolts, with hv oil pump and windage tray came with the car so any advice on the carb conversion or motor buildup are appreciated. Thanks!

Joe
 
8

85GTlover

New Member
Mar 20, 2004
704
0
0
Jun 14, 2004
#2
  • Jun 14, 2004
  • #2
Yes your car should be roller cam and forged pistons stock the autos have 180hp as opposed to the carbed 210hp. There should be a spot for the mechanical fuel pump by the oil filter right in front of it.....on my stock motor anyway. As for the rearend opinions vary but I would advise getting a 8.8 asap as you know they are much stronger than the others and will take the extra power and last longer but the 7.5 should last a while if not abused all the time. The tranny I cannot say, I prefer stick.
 

Dark Knight

Founding Member
Feb 1, 2000
2,578
0
0
Chandler, Az.
Jun 15, 2004
#3
  • Jun 15, 2004
  • #3
I think the CFI cars had the flat tappet cam, the carb ones came with the roller...
conversion

http://www.carbdford.com/tech/CFICARB/part_1.htm

you might also try www.foureyedpride.com
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
956
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
A
85 carb’ed mustang keeps dying
  • Alextheornery
  • Jan 13, 2021
  • Fox 5.0 Mustang Tech
Replies
17
Views
6K
Fox 5.0 Mustang Tech Jan 16, 2021
7991LXnSHO
Engine Cam idle and timing questions - big cam, little knowledge
  • Justin87
  • Jul 6, 2021
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
11K
Fox 5.0 Mustang Tech Jul 31, 2021
Middleagecrisis
M
Giving the bird... new brains.
  • slipkid269
  • Jun 25, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 26, 2021
CarMichael Angelo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?