• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Newbie temp gauge problems

  • Thread starter Thread starter sgw_88FoxGT
  • Start date Start date Jul 31, 2008

sgw_88FoxGT

Member
May 18, 2008
43
0
6
Jul 31, 2008
#1
  • Jul 31, 2008
  • #1
My temperature gauge doesn't work. Doesn't move at all actually. I have no idea how to go about fixing it or where to start. I have all the necessary tools and a volt meter w/probes. Where do I start?
 
R

Rick James

Member
May 13, 2007
172
3
19
burlington new jersey
Jul 31, 2008
#2
  • Jul 31, 2008
  • #2
Check the temperature sending unit.Go buy a chilton or haynes book at the parts stoe.
 

sgw_88FoxGT

Member
May 18, 2008
43
0
6
Jul 31, 2008
#3
  • Jul 31, 2008
  • #3
I have a chiltons but it's no help.

Temp sending unit, you mean the ECT? I know that works, I checked it.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 31, 2008
#4
  • Jul 31, 2008
  • #4
Turn the ignition switch to the Run position. Check for voltage at the sender connection (driver's side, lower front intake manifold). Mine shows about 5 volts with the wire disconnected from the sender. The sender connection is a single wire with a push on connection. No voltage, check the ten pin salt 7 pepper shakers. One of the wires is for the temp gauge sender. No voltage there, there is a bad connection in the wiring or in the gauge cluster, or the gauge is faulty.



Check the resistance between the sender push on terminal and the engine block: it should about 74 Ohms cold (+/- 20%) and 10 Ohms hot (+/- 20%). If the sender is out of resistance spec, replace it.
 
You must log in or register to reply here.

Similar threads

C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
178
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
318
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
387
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?