Newer Bullett wheels on a 67'

[polo708]

What will it take to make the new edge bullett wheels fit a 67'??

 

[Grabber70Mach]

94-04 needs 1" in the front and 7/16" in the rear.

05-up I have heard uses 1.25", but have no first hand experience with these.

Check this link out.

Wheel Conversion Kits — Vintage Venom - Vintage Mustang Disc Brake Kits

 

[ForceFed70]

The short answer: Spacers.

What's the specs on these wheels you mention. Obviously not OEM...

 

[polo708]

The short answer: Spacers.

What's the specs on these wheels you mention. Obviously not OEM...

not sure... they are the GT wheels on most 99-04 stangs.

 

[Grabber70Mach]

not sure... they are the GT wheels on most 99-04 stangs.

Wheel Specifications
Style: Bullitt Finish: Chrome
Size: 17x8 Centercap Size: Large (2-1/2")
Back Spacing: 5.72" (145mm) Offset: +30mm (1.18")
Bolt Pattern: 5x4.5" (5x114.3mm) Fitment: 94-04 V6, GT, Bullitt,
Mach 1, and Cobra


Wheel Specifications
Style: Bullitt Finish: Chrome
Size: 17x9 Centercap Size: Large (2-1/2")
Back Spacing: 5.94" (151mm) Offset: +24mm (0.94")
Bolt Pattern: 5x4.5" (5x114.3mm) Fitment: 94-04 V6, GT, Bullitt,
Mach 1, and Cobra


Wheel Specifications
Style: Bullitt Finish: Chrome
Size: 17x10.5 Centercap Size: Large (2-1/2")
Back Spacing: 6.8" (174mm) Offset: +28mm (1.10")
Bolt Pattern: 5x4.5" (5x114.3mm) Fitment: 94-04 V6, GT, Bullitt,
Mach 1, and 94-98 Cobra