Nitrous Anyone?

[Todd00GT1]

I've been contemplating the purchase of Nitrous this Spring. I was wondering what kits some of you guys have and likes/dislikes with them? I have a 00 GT so i'd like to hear from you guys w/the 99-04 GT's. Any feedback is much appreciated. Please post pics of your installs if you have any.
Thanks,
Todd

 

[steveb24]

this spring for me: NX plate kit, gen x-2 kit, zex window switch, dyno tune = money setup

 

[04GTMustang]

yes i would like to hear some information on this topic as well. Im thinking about spraying a lil bit. but i dont exactly know what i want im just looking for something in the 12s

 

[streetstang03]

NX wet kit, NX GenX2 & purge kit (http://www.americanmuscle.com/niexackit2.html), window switch, colder plugs and a dyno tune and you'll be set.

 

[SamMan]

I have a NOS kit but if I had it to do over I would go with NX. Both kits are pretty much the same however NX solinoids are probably a little better plus they rate their kit at the wheels while the others rate at the flywheel.

I am not sure that anything under a 125 shot requires a dyno tune but you should put it on a dyno to see if the a/f ratio is not too lean. If it is lean then you do need a tune but otherwise I dont think its necessary. Of course with a dyno tune you will get the most out of the spray.

Also I wouldnt consider a window switch necessary on an auto car.

 

[steveb24]

i thought the purge comes with the gen x2 kit

 

[streetstang03]

i thought the purge comes with the gen x2 kit

it used to not come with it. maybe they started including it recently?

 

[superstang01]

is it safer to run a dry shot or a wet shot??

 

[streetstang03]

wet

 

[superstang01]

does the gen x2 kit coem with everything you need except a bottle?

 

[steveb24]

umm.. the bottle comes with the standard kit

 

[LaserRed01GT]

NX 125 wetshot, with all the safety goodies and purge:

View attachment 405050

View attachment 405052

View attachment 405054

 

[steveb24]

can u mount the solenoids somewhere else? or does it have to be up front

 

[LaserRed01GT]

can u mount the solenoids somewhere else? or does it have to be up front

You can mount your solenoids wherever you want, but it just makes it easy to R&R them to send them in for inspection, and it keeps the fuel solenoid close to the schrader valve.

 

[steveb24]

true.. im gonna mount mine next to the intake tube.. along the fenderwell

where do you have your purge comin out at?

 

[LaserRed01GT]

true.. im gonna mount mine next to the intake tube.. along the fenderwell

where do you have your purge comin out at?

Right now my purge just shoots straight down to the ground via the small copper tubing off the purge solenoid. I thought about doing a cowl mounted double purge valve, but I still haven'y decided yet.

 

[steveb24]

that would be .. sick. i havent decided yet.. but im thinkin out the front grille near the pony would look nice.. i just dont want hoses and wires floating all over the place.

 

[LaserRed01GT]

that would be .. sick. i havent decided yet.. but im thinkin out the front grille near the pony would look nice.. i just dont want hoses and wires floating all over the place.

I've always loved this picture!

View attachment 404824

 

[04fullitgt]

I've always loved this picture!

View attachment 404714

that pic is wicked!

 

[SamMan]

I dont know that might be a little too "Paul Walker" for me.

"I neeeeed NAWZzzz. Give me two of BIG ONEZ!!!".