Nitrous Install Problems

[YawnY]

I have an issue when installing my NOS kit, its the direct port that has the spacer going in-between the upper and lower intakes.
I got every in and set-up but when trying to install the solenoids onto the fuel/nitrous inlets on the nitrous plate the metal lines wouldn't fit properly and I could not fit the solenoids along the fuel rail, the metal lines would hit the upper intake and the solenoids would not clear the injectors or rail.

Anyone ever had this issue or know a way around this?

This is the install manual for it. I have the GT-40 intake on my car.

http://www.holley.com/data/Products/Technical/A5076-SNOS.pdf

Any help would be really REALLY Appreciated.

 

[Rick 91GT]

Ive had to rebend lines out of some kits in the past, do you have a tubing bender, is the spacer on in the correct direction?

 

[YawnY]

I can get a brake line bending tool but not sure if that will work, and I'm certain its on the proper way, Nitrous (blue) is on the drivers side.

 

[YawnY]

See the issue is how much room between the solenoids and the fuel rail, doesn't seem like it matches up at all, and the lines are just not even close.

 

[Rick 91GT]

If they are way off call Holley, othwrwise youll have to get some line and bend them yourself.