• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

nitrous newb in need of help

  • Thread starter Thread starter johnnyt03gt
  • Start date Start date Sep 26, 2009

johnnyt03gt

5 Year Member
Mar 15, 2008
453
5
29
dallas TX
Sep 26, 2009
#1
  • Sep 26, 2009
  • #1
ok, i decided to i want a 75 shot of juice "stock 2v"
i just can't decide between. nx, zex, venom, nos eventually im getting a blower but for now i want spray. what im looking for is easy instill and most importantly safety for my engine
questions are
A can i mount fuel and nitrous pressure gauges inside the car
B can i mount the bottle inside the car is that safe?
C is a dry kit safe

 
F

fromadig91

Member
Jul 27, 2008
95
0
6
Sep 26, 2009
#2
  • Sep 26, 2009
  • #2
A. Yes
B.Yes, preferably the trunk
C. "Safe" is a very uneasy term, Nitrous 101 says that wet kits are always better then dry, however from what i've heard over the years (never actually done it) A dry kit is fine for anything < 100HP this also goes for not needing a custom tune. I'm sure some of the stangnet members with nitrous experience will be on here shortly
 
S

sicTremor

New Member
Sep 26, 2009
1
0
0
wichita, kansas
Sep 26, 2009
#3
  • Sep 26, 2009
  • #3
wet kits arent any better that dry. It all depends on how the system is set up. wet kits have the potential to puddle fuel in the plastic intake, but i dont know how common this is. i run an anderson/NX dry kit on my 00 GT. Everything is controlled through the anderson PMS, and i have never had any problems with this. The extra fuel is supplied through the computer/injectors, and i have gone as high as .063 jets (200 shot) and never had a problem. wow...first post...lol
 

johnnyt03gt

5 Year Member
Mar 15, 2008
453
5
29
dallas TX
Sep 26, 2009
#4
  • Sep 26, 2009
  • #4
i ment to say inside the cockpit behind passenger seat also why are some dry kits more
expensive then wet kits i was looking at the. harris speed works sudden impact black momba kit last question nos foger safer then the rest ? thanks
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Sep 26, 2009
#5
  • Sep 26, 2009
  • #5
I ran the NOS Noszle kit at 125 HP with no issues, but I also had a Kenne Bell Boost A Pump, a Plasma Booster, a NOS window switch, fuel pressure switch, etc. If you put together a solid kit and dont abuse the car, nitrous can be safe. BTW, I ran this on a bone stock tune...just as NOS recommended. Could I have gotten more HP with a tune? Sure...but likely would have been closer to the edge. I was running rich (I also had an Innovate Motorsports wideband and Autometer FP gauge) but that is much safer than lean. I wasnt 'pig' rich, but I was running on the safe side.
 

johnnyt03gt

5 Year Member
Mar 15, 2008
453
5
29
dallas TX
Sep 27, 2009
#6
  • Sep 27, 2009
  • #6
ok looks like i want a wet kit do i need a fpss?
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Sep 27, 2009
#7
  • Sep 27, 2009
  • #7
YES! But they are cheap...circa $30
 

johnnyt03gt

5 Year Member
Mar 15, 2008
453
5
29
dallas TX
Sep 27, 2009
#8
  • Sep 27, 2009
  • #8
twogts4us said:
YES! But they are cheap...circa $30
Click to expand...

Kool if you had to pick one brand between zex nx or nos
What would. You get I like zex because it looks cool and I like
Nos cuse they been around forever. Everyone has noting
But good things too say about nx

Posted via Mobile Device
 

johnnyt03gt

5 Year Member
Mar 15, 2008
453
5
29
dallas TX
Sep 27, 2009
#9
  • Sep 27, 2009
  • #9
twogts4us said:
YES! But they are cheap...circa $30
Click to expand...


Now I just need to pick a brand I like zex nos nx
Harrisspeed works sudden impact black momba nice also Wich
One would you guys get?
Posted via Mobile Device
 

johnnyt03gt

5 Year Member
Mar 15, 2008
453
5
29
dallas TX
Sep 27, 2009
#10
  • Sep 27, 2009
  • #10
johnnyt03gt said:
Now I just need to pick a brand I like zex nos nx
Harrisspeed works sudden impact black momba nice also Wich
One would you guys get?
Posted via Mobile Device
Click to expand...

Sorry re post

Posted via Mobile Device
 

bhuff30

Founding Member
Dec 11, 2001
6,037
35
129
Olathe KS
Sep 27, 2009
#11
  • Sep 27, 2009
  • #11
Just a note for question A: NHRA rules state that you must have a seperator line if you run a fuel pressure gauge into the cabin. They don't want raw fuel to have a way inside the car incase the gauge or tubing were to fail and start leaking. Either that, or a digital gauge. Not only is it a rule at the track, it is a very good safety point to follow for a street car too. You don't want gas pumping into the interior!
 

Tim2002GT

Founding Member
Apr 10, 2002
635
4
29
Tulsa, Oklahoma
Sep 28, 2009
#12
  • Sep 28, 2009
  • #12
johnnyt03gt said:
Now I just need to pick a brand I like zex nos nx
Harrisspeed works sudden impact black momba nice also Wich
One would you guys get?
Posted via Mobile Device
Click to expand...

I can vouch for the Harris Speedworks kit. I have been using it for the last couple of years. It came with easily understood instructions and their customer support is/was great. Something to keep in mind also, Zex and NOS rate their hp #'s at the crank while NX, Dynotune, and HSW rate theirs at the tire. Not a big deal really, as you could always buy additional fuel/nitrous jets later.
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Sep 28, 2009
#13
  • Sep 28, 2009
  • #13
I was happy with my NOS Noszle kit - it's simply the best kit for the mod motor. But it's not cheap. Otherwise, as you noted, NX seems to be the kit of choice.
And obviously you'll need an ELECTRONIC fuel pressure gauge. I've got an autometer. I'd also recommend a wideband.

Attached is my fuel setup. The brass fitting is where it mounts into the schrader valve on the fuel rail. it then splits a couple times with Tees to branch off to the FPSS, FP Sending Unit, and to the nitrous distribution block.

Also shown is the gauges I had.
 

Tim2002GT

Founding Member
Apr 10, 2002
635
4
29
Tulsa, Oklahoma
Sep 28, 2009
#14
  • Sep 28, 2009
  • #14
twogts4us said:
it's simply the best kit for the mod motor.
Click to expand...

That may be true if your going to spray a big shot, over 150 hp. But, IMO, a single fogger nozzle kit works just as well for anything under 150hp. You only have to change 2 jets, not 16.
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Sep 28, 2009
#15
  • Sep 28, 2009
  • #15
Tim2002GT said:
That may be true if your going to spray a big shot, over 150 hp. But, IMO, a single fogger nozzle kit works just as well for anything under 150hp. You only have to change 2 jets, not 16.
Click to expand...

No doubt you have a good point there...and if I didn't get my kit for a super deal, I would have gone with a single nozzle.
 
You must log in or register to reply here.

Similar threads

First gear is too tall. Should I make it taller? Nitrous guys, help!
  • FastDriver
  • Dec 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 31, 2023
AeroCoupe
Nitrous Install
  • White Wolf
  • Mar 19, 2020
  • 2005 - 2014 Specific V6 Tech
Replies
0
Views
1K
2005 - 2014 Specific V6 Tech Mar 19, 2020
White Wolf
For Sale 2011-14 V6 Nitrous Plate System - BRAND NEW $800 Las Vegas NV
  • White Wolf
  • Dec 25, 2018
  • Engine and Power Adder
Replies
1
Views
2K
Engine and Power Adder Dec 26, 2018
White Wolf
F
  • Poll Poll
Forced Induction 94 GT - Next BIG Mods?!?
  • fastrevo9
  • Mar 9, 2019
  • 1994 - 1995 Specific Tech
Replies
4
Views
2K
1994 - 1995 Specific Tech Mar 10, 2019
96pushrod
S
2001 Mustang V6 Build list/questions about parts
  • SilverChariot
  • Mar 24, 2018
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
4K
1996 - 2004 SN95 Mustang -General/Talk- Apr 11, 2018
christheangel
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?