• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

nitrous questions

  • Thread starter Thread starter blue87lx
  • Start date Start date Nov 28, 2005
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Nov 28, 2005
#1
  • Nov 28, 2005
  • #1
what kind of injectors and plugs should i be using before i use nitrous? its a zex 125 shot. i have victor jr heads and edelbrock intake with a custom cam. should i worry about leaning out with an aftermarket fuel pressure regulater that i have to adjust manually since my nitrous kit adjusts fuel pressure through vaccum? all help apreciated guys
 

craigwhite89gt

New Member
Oct 26, 2003
181
0
0
Cecil County Maryland
Nov 28, 2005
#2
  • Nov 28, 2005
  • #2
Im no expert on this at all im jus letting u know...
when i started running nitrous i put 24lb inj...255 pump and a reg....and ran a 50 then 75 shot and never had leaning problems... jus another 1 .. like blowing a head gasket i belive and seizing the motor.... but thats not the point here ... I never leaned out on my compucar kit with that setup
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Nov 28, 2005
#3
  • Nov 28, 2005
  • #3
yea im just wondering because with just my heads and intake 24lb's should be good. also what about o2 sensors ? will they definatly play a big part when on the bottle?
 

craigwhite89gt

New Member
Oct 26, 2003
181
0
0
Cecil County Maryland
Nov 28, 2005
#4
  • Nov 28, 2005
  • #4
to tell u the truth i dont even think mine work cuz my check engine light comes on and off.. Once again im not positive theres others that know alot more than me... but i dont think they should have anything to do with nitrous
 
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
Nov 28, 2005
#5
  • Nov 28, 2005
  • #5
I am not sure what plugs you should run, but I called the guys at NX in TX, he gave me a direct # to NGK and the guy there recommended some plugs for my set-up. They have worked out very well. I run a NX wet kit 150 shot. Retard the timing 2-4deg for a 100 and run colder plugs. I have not had a problem at all doing that. Multiple runs on the dyno and the car stays about 11-12 which is a little rich, but better safe than sorry. Stock motor with minor bolt ons = 327hp and 459 ftlb tq to the wheels. with juice of course.
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Nov 30, 2005
#6
  • Nov 30, 2005
  • #6
I got a 100 shot and i was running stock every thing, but with a wide band I was not running lean
 
You must log in or register to reply here.

Similar threads

D
Fuel pump upgrade
  • dkrupp79
  • Jul 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
352
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 10, 2025
Scrapla347
T
  • Locked
Digital Tuning A9l issue or something else
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
368
Fox 5.0 Mustang Tech Sep 11, 2025
Noobz347
T
Fuel Looking for a little guidance
  • Tufgriz
  • Sep 11, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
481
Fox 5.0 Mustang Tech Sep 12, 2025
Noobz347
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
482
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
A
Resolved Fuel pressure high at 52 new FPR same thing
  • afjLX
  • Dec 28, 2024
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
90
Views
5K
Fox 5.0 Mustang Tech Jan 11, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?