nitrous questions

blue87lx

New Member
Apr 23, 2005
175
0
0
what kind of injectors and plugs should i be using before i use nitrous? its a zex 125 shot. i have victor jr heads and edelbrock intake with a custom cam. should i worry about leaning out with an aftermarket fuel pressure regulater that i have to adjust manually since my nitrous kit adjusts fuel pressure through vaccum? all help apreciated guys
 
Im no expert on this at all im jus letting u know...
when i started running nitrous i put 24lb inj...255 pump and a reg....and ran a 50 then 75 shot and never had leaning problems... jus another 1 .. like blowing a head gasket i belive and seizing the motor.... but thats not the point here ... I never leaned out on my compucar kit with that setup
 
yea im just wondering because with just my heads and intake 24lb's should be good. also what about o2 sensors ? will they definatly play a big part when on the bottle?
 
I am not sure what plugs you should run, but I called the guys at NX in TX, he gave me a direct # to NGK and the guy there recommended some plugs for my set-up. They have worked out very well. I run a NX wet kit 150 shot. Retard the timing 2-4deg for a 100 and run colder plugs. I have not had a problem at all doing that. Multiple runs on the dyno and the car stays about 11-12 which is a little rich, but better safe than sorry. Stock motor with minor bolt ons = 327hp and 459 ftlb tq to the wheels. with juice of course.