• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Nitrous Questions??

  • Thread starter Thread starter jhaynes578
  • Start date Start date Dec 22, 2006
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last

96BlueStangGT

Member
Jul 7, 2004
38
0
16
Southern Indiana
Dec 26, 2006
#41
  • Dec 26, 2006
  • #41
Tape said:
Learn to read and quite beating a dead horse! They started the crap, I gave an opinion and they didn't like it. If you give expect to receive. young , yeah... been driving for 2 or 3 yrs, how much can you know other than what you have heard and then you just repeat it without knowing. I only comment on experience. damn let it go or we can go a few if you like!
Click to expand...

I don't have time for this, but you keep telling us you have experience with nitrous. What was your experience that makes you think it's unsafe?

To the thread starter, I believe this is the Focus pump part number, you'll need it - 3S4Z-9H307-BC
 

SamMan

New Member
Aug 20, 2005
121
0
0
Denton, TX
Dec 26, 2006
#42
  • Dec 26, 2006
  • #42
There is a lot of really bad advice/information in this thread.

I have been running a NOS 125 shot for 2 years without so much as a hiccup. NOS rates their kits at the crank so that translates into just under 100 at the wheels when the pressure is right at 1000psi which is optimal. I run stock timing with colder plugs and 93 octane gas. If its hot outside I will go ahead and run 50% 108 octane race fuel as added insurance. I have an auto so I dont run a window switch but if I had a stick I wouldnt run without one. Nitrous is as safe as the guy behind the wheel and whomever set it up. As with any of the other methods you can destroy your engine with too big a shot/too much boost. I dont recomend anything over 125 to the wheels on a stock 2v. Anything above 100 to the wheels and you need to start pulling timing. Every car is different to some degree and for that reason as soon as your kit is installed GET IT DYNOED. Not necessarily for any other reason than to ENSURE YOUR A/F RATIO IS GOOD. Lean conditions cause engines to blow whether they are turbo/charged/sprayed.

Oh and to the guy with the centri. I have yet to be beaten by a centri in the 1/8th. Ive even raced guys with significantly higher HP than me. Granted I would rather have a centri but for no other reason than I hate filling bottles. As far as the track is concerned though nitrous is king IMO.

Nitrous = torque. Plain and simple.

"Horsepower sells cars, torque wins races." - Carol Shelby
 

jhaynes578

New Member
Jul 3, 2006
13
0
1
Nebraska
Dec 26, 2006
#43
  • Dec 26, 2006
  • #43
wow theres a lot of bs in this tread...but thank you to all the people with helpful advice and no thank you to the ones with no helpful advice...
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Dec 26, 2006
#44
  • Dec 26, 2006
  • #44
jhaynes578 said:
wow theres a lot of bs in this tread...but thank you to all the people with helpful advice and no thank you to the ones with no helpful advice...
Click to expand...

Hope I helped somewhat. Sorry you had to hear so much BS from Tape .
 

Tape

Banned
Dec 21, 2006
41
0
0
Birmingham
Dec 28, 2006
#45
  • Dec 28, 2006
  • #45
http://forums.stangnet.com/showthread.php?t=678166
 

SamMan

New Member
Aug 20, 2005
121
0
0
Denton, TX
Dec 28, 2006
#46
  • Dec 28, 2006
  • #46
For every blown intake you show me I can show you a blown motor on a turbo or supercharged car so your point is what?

LS2KLR has been running a 225 shot for a few years. I would say thats a pretty damned good run. It sucks that it happened to him but if you read the entire thread you will see he is buying a new intake and reinstalling the spray.
 

Tape

Banned
Dec 21, 2006
41
0
0
Birmingham
Dec 28, 2006
#47
  • Dec 28, 2006
  • #47
my point is your a little dick!
 

96BlueStangGT

Member
Jul 7, 2004
38
0
16
Southern Indiana
Dec 28, 2006
#48
  • Dec 28, 2006
  • #48
Tape, let it go man. My point is you won't be here too long with the way you act.
 

04YELLOWGT

Active Member
Jun 29, 2005
1,135
2
39
Indiana
Dec 28, 2006
#49
  • Dec 28, 2006
  • #49
SamMan said:
Oh and to the guy with the centri. I have yet to be beaten by a centri in the 1/8th. Ive even raced guys with significantly higher HP than me. Granted I would rather have a centri but for no other reason than I hate filling bottles. As far as the track is concerned though nitrous is king IMO.

Nitrous = torque. Plain and simple.

"Horsepower sells cars, torque wins races." - Carol Shelby
Click to expand...

I guess your talking about me.... Have you raced at a 1/4 mile track and if so what are your times? Ive raced nitrous guys on the street and at the 1/4 track they usually pull me the first 200-300 feet but Im usually around them or going around them by the 1/8 mile. Ive raced a kid in town at Osceola w/ 150 shot, 4.10s, and full exhaust with LTs and I still beat him by 2 cars. This was before the IC, smaller pulley and new tune.

The problem is centri cars dont really shine untill the last 1/8.
 
J

JayC

Founding Member
Jul 11, 2000
674
0
17
Southern Indiana
Dec 28, 2006
#50
  • Dec 28, 2006
  • #50
04YELLOWGT said:
I guess your talking about me.... Have you raced at a 1/4 mile track and if so what are your times? Ive raced nitrous guys on the street and at the 1/4 track they usually pull me the first 200-300 feet but Im usually around them or going around them by the 1/8 mile. Ive raced a kid in town at Osceola w/ 150 shot, 4.10s, and full exhaust with LTs and I still beat him by 2 cars. This was before the IC, smaller pulley and new tune.

The problem is centri cars dont really shine untill the last 1/8.
Click to expand...

Hmmmmm, been just the opposite for me. I never have trouble with stock block blower cars . What are you running in the 1/4?
 

Tape

Banned
Dec 21, 2006
41
0
0
Birmingham
Dec 28, 2006
#51
  • Dec 28, 2006
  • #51
96BlueStangGT said:
Tape, let it go man. My point is you won't be here too long with the way you act.
Click to expand...

awwww, that would be awful not to listen to a bunch of boys that don't know what their talking about!
 
J

JayC

Founding Member
Jul 11, 2000
674
0
17
Southern Indiana
Dec 28, 2006
#52
  • Dec 28, 2006
  • #52
Tape said:
awwww, that would be awful not to listen to a bunch of boys that don't know what their talking about!
Click to expand...

As someone that's probably even older than you and knows something about nitrous, I'm getting tired of your BS as well.
 

04YELLOWGT

Active Member
Jun 29, 2005
1,135
2
39
Indiana
Dec 28, 2006
#53
  • Dec 28, 2006
  • #53
JayC said:
Hmmmmm, been just the opposite for me. I never have trouble with stock block blower cars . What are you running in the 1/4?
Click to expand...

Are you stock block, if so damn, 12.7s NA is pretty impressive. You'd hurt me pretty bad. lol The best I ran was 12.6x @ 109 with 2.09 60ft. couldn't hook with the Nitto DRs. I figure Im low 12s now with the IC, Pulley, and Tune. Hoping for mid 11s once the block and other goodies are in. Shooting fow low 11s high 10s when I'm all said and done though.
 
J

JayC

Founding Member
Jul 11, 2000
674
0
17
Southern Indiana
Dec 28, 2006
#54
  • Dec 28, 2006
  • #54
04YELLOWGT said:
Are you stock block, if so damn, 12.7s NA is pretty impressive. You'd hurt me pretty bad. lol The best I ran was 12.6x @ 109 with 2.09 60ft. couldn't hook with the Nitto DRs. I figure Im low 12s now with the IC, Pulley, and Tune. Hoping for mid 11s once the block and other goodies are in. Shooting fow low 11s high 10s when I'm all said and done though.
Click to expand...

Yep, I'm all stock longblock, just pullies, upper plenum/throttle body and longtubes The Nitto's are killing you at the track. Try some 15" Hoosier QTP's or E.T. Streets and you'll surprise yourself
 

04YELLOWGT

Active Member
Jun 29, 2005
1,135
2
39
Indiana
Dec 28, 2006
#55
  • Dec 28, 2006
  • #55
^^ Thats crazy! I guess it shows you how much a good drivers worth. I’ve been thinking about adding a small 50-75 shot once the blocks in, but I'm still little hesitant though.

I already have some E.T.s in the garage waiting to go on. Cars under storage insurance right now, I wish I wouldn’t have put it in storage because we have had like 1" of snow all year here. Come end of January, as long as we don’t have snow, it will be out since thats when the blocks going in. I can’t wait till April/May though, when it starts getting nice. Hoping to get some 1.8-1.7 60' and with the new mods be in the 11s. I’m going after a friend of mine’s 03 Cobra.
 

Tape

Banned
Dec 21, 2006
41
0
0
Birmingham
Dec 28, 2006
#56
  • Dec 28, 2006
  • #56
JayC said:
As someone that's probably even older than you and knows something about nitrous, I'm getting tired of your BS as well.
Click to expand...

your one of the main one's dishing out the BS, you and your butt buddies
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Dec 29, 2006
#57
  • Dec 29, 2006
  • #57
Please lock this thread up mods

Tape has ruined the thread and there isn't any tech left in here...
 

Bad Karma

New Member
Sep 14, 2006
24
0
0
Eastern NC
Dec 29, 2006
#58
  • Dec 29, 2006
  • #58
150 will not blow your motor, if used properly 150shot tuned is just as safe as any s/c ,turbo
 
J

JayC

Founding Member
Jul 11, 2000
674
0
17
Southern Indiana
Dec 29, 2006
#59
  • Dec 29, 2006
  • #59
Tape said:
your one of the main one's dishing out the BS, you and your butt buddies
Click to expand...


Not quite so.......I'm running a 150 shot with great results and you're running your mouth
 

ZaC851

Founding Member
May 23, 2002
270
0
17
Birmingham, AL
Dec 29, 2006
#60
  • Dec 29, 2006
  • #60
Tape, just stop posting. Your making an ass out of yourself.
 
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
598
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
888
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
9
New from northern MN
  • 91firecracker
  • Apr 19, 2026
  • The Welcome Wagon
Replies
5
Views
110
The Welcome Wagon Apr 19, 2026
Noobz347
Resolved Three way cat converters..?
  • PonyGTrider
  • Nov 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
246
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 2, 2025
PonyGTrider
D
66 Coupe Progress Thread
  • DTCRAWLEY
  • Apr 19, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
43
Views
810
1965 - 1973 Classic Mustangs -General/Talk- Jun 17, 2026
DTCRAWLEY
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?