No spark...Distributer prob?? HELP PLEASE!

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 12, 2004

#1

• Aug 12, 2004

• #1

Ok, last time my car wouldnt start so i figured it was the TFI. I swaped distributers with a friend, used my cap, and the car started no problem It was getting no spark. So i bought a new TFI. Tried to start the car tonight. Still no spark! I took the router off and cleaned it up. I got a small spark once, but nothing after that. Still no spark! So whats fudged on my distributer?

HELP PLEASE!

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 12, 2004

#2

• Aug 12, 2004

• #2

ever think of the wires? ???? maybe you batt is toast test it out then go down the line to a good solenoid. then healthy ground/power.

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 12, 2004

#3

• Aug 12, 2004

• #3

Well it worked great with my friends dist. All we did was swap dist, annd it ran fine.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 12, 2004

#4

• Aug 12, 2004

• #4

you say you bought a new dizzy?

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 12, 2004

#5

• Aug 12, 2004

• #5

No. mine wouldnt work. i swapped with a friend. Worked. So we swapped back and i bought a new TFI. Figured that was the problem. It wasnt. So i still have my dist, new TFI though.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 12, 2004

#6

• Aug 12, 2004

• #6

what kinda ignition you have?

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 12, 2004

#7

• Aug 12, 2004

• #7

Stock

FMS wires.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 12, 2004

#8

• Aug 12, 2004

• #8

d@mn............that is to much thinking for me.....i dont know what to tell you there is a weak link some where.

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 12, 2004

#9

• Aug 12, 2004

• #9

the stator in the dist maybe?? that the TFI plugs into?

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 12, 2004

#10

• Aug 12, 2004

• #10

well you said it runs fine on your freinds car?

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Aug 12, 2004

#11

• Aug 12, 2004

• #11

You have already correctly diagnosed the problem. There is Hall Effect sensor in the distributor that triggers the TFI. It uses the shutter wheel to pass or block an magnetic field.

You have to press the distributor gear off the change the hall effect sensor. It takes a press to get it off and back on again. A lot of guys just spring for a new distributor, since it is about $75 exchange.

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 12, 2004

#12

• Aug 12, 2004

• #12

My car runs fine with his dist. Never tried mine in his.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 12, 2004

#13

• Aug 12, 2004

• #13

well then clearly it has to be your dist now is a good time for a msd or crane.

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 13, 2004

#14

• Aug 13, 2004

• #14

Well i took the dist apart today. Might have found the problem in the process though. The two screws that hold down the stator are gone.. they are nowheres to be found! So maybe these two screws need to be there for grounding purposes?

Either way, i ordered a new stator. Should be in tomorrow. Hopefully it works!

Oh the two pins that hold the gear and other thing on (don't know the name) Can you just reuse them? Or get new ones?

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Aug 14, 2004

#15

• Aug 14, 2004

• #15

reuse em.........

 

Scott_B

"1 Arm Wonder! "

Founding Member

Oct 27, 1998

4,197

0

66

NS Canada!

Aug 14, 2004

#16

• Aug 14, 2004

• #16

thanks..works now!

too bad i have other problems!