noise in front springs

1

1968fastback5.0

New Member

Feb 3, 2007

6

0

1

Mar 21, 2007

#1

• Mar 21, 2007

• #1

I did a rebuild of the front end on my 1968 mustang. I used grab a track parts from mustang plus with there 620 front springs. After about a week of driving it started making a snaping noise and it sounds like it is coming from the shock towers, but I am not sure. I have gone back and retightened all bolts and regreased everything with no change in the noise. Has anyone had this problem after a rebuild. Thanks Greg

 

C

C6AE

Member

Mar 22, 2004

145

1

17

Ma.

Mar 22, 2007

#2

• Mar 22, 2007

• #2

Your UCA bushings are dry. Mine did the same thing, I took them apart and did the Mustang Steve mod on them to allow the grease to travel the length of the thread. They're nice and quiet now

 

mustangmike6996

5 Year Member

Nov 10, 2005

483

6

29

clinton twp, MI

Mar 22, 2007

#3

• Mar 22, 2007

• #3

also make sure there is a spring isolator in the proper location and indexed properly at the top of the coil spring ..... sometimes people forget to put them in. simple mistake.....

 

red65

Member

Apr 12, 2003

411

0

17

Ann Arbor, MI

Mar 22, 2007

#4

• Mar 22, 2007

• #4

When lowering the front of a '65, it is not uncommon for the sway bar to make contact with the frame rail when the suspension compresses a bit (during braking or turning). I'm not sure if the same problem may occur on a '68, but it's easy enough to make sure you've got clearance between the sway bar and frame to allow for max suspension travel.

The symptom is a loud 'clack' sound on hard braking or turning, perhaps made worse when you've got additional people (or other weight) in the car. Hope that helps.

 

1

1968fastback5.0

New Member

Feb 3, 2007

6

0

1

Mar 22, 2007

#5

• Mar 22, 2007

• #5

Thanks for the replys. I think I will pull the springs back out to see if the UCB are dry and check if the spring isolators were seated right. What is the Mustang steve mod to get more grease in them.

 

C

C6AE

Member

Mar 22, 2004

145

1

17

Ma.

Mar 23, 2007

#6

• Mar 23, 2007

• #6

look under suspension.
http://www.mustangsteve.com/msFAQsuspension.html