• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Normal Engine vac???

  • Thread starter Thread starter vristang
  • Start date Start date Aug 18, 2005

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 18, 2005
#1
  • Aug 18, 2005
  • #1
Still having oil issues with the 408w.

What is normal engine vac? What do you guys usually run at?

I am checking mine and I get 17-18 at idle.

Is this too much for the pcv to handle?

I seem to be having vac leak symptoms from the pvc line. When I crimp the line from the pcv to the upper intake the idle drops to a normal range. I also seem to be getting small amounts of oil in the intake too. Is there something I didn't hook up right?

Thanks in advance for any advice
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 18, 2005
#2
  • Aug 18, 2005
  • #2
You are right in the ball park. Stockish motors pull 18-22" hg. I am at 19.5".

As you know, your cam can really toss the vac signal out the window, so it sounds like yours is well-mannered.

Gonna have to think about the crimping part for a little bit......

Good luck.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 19, 2005
#3
  • Aug 19, 2005
  • #3
Thanks Hissin.

I am still struggling with the meaning of values from the vac gauge. This helps.

I think I'll be even happier with the cam when I solve this problem!!!

The best I can figure is that I grabbed the wrong pcv off the shelf, and it is not restricting flow at idle the way it should.

Any other thoughts?
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Aug 19, 2005
#4
  • Aug 19, 2005
  • #4
You have a good amount of vacuum at idle... Did you look at the PCV line for any cracks?

As for the oil in the intake, it's probably getting sucked up through the PCV. You can probably get an inline seperator / filter to prevent the oil from getting in there.
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
Aug 19, 2005
#5
  • Aug 19, 2005
  • #5
The rule of thumb is for 17"-21" of Hg at idle. A cam with more overlap or more duration lessens the vacuum at idle, as does obviously vacuum leaks.
 

BERT306

Member
Jun 18, 2005
75
0
7
Aug 19, 2005
#6
  • Aug 19, 2005
  • #6
i've only got 8-9" at idle w/my x cam??? cant find any leaks so i just blame it on the cam
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 19, 2005
#7
  • Aug 19, 2005
  • #7
BERT306 said:
i've only got 8-9" at idle w/my x cam??? cant find any leaks so i just blame it on the cam
Click to expand...


Are you able to run power brakes with that?

What is considered the minimum for runnig vac assisted brakes?
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 19, 2005
#8
  • Aug 19, 2005
  • #8
srothfuss said:
You have a good amount of vacuum at idle... Did you look at the PCV line for any cracks?

As for the oil in the intake, it's probably getting sucked up through the PCV. You can probably get an inline seperator / filter to prevent the oil from getting in there.
Click to expand...

Yeah, the hoses are all very new.

I will check at the parts store today, maybe I picked up the wrong pcv. At this vac level most people seem to be ok without using a seperator. I would hate to buy and install extra parts that aren't needed, but that may be my only option.

Thanks for jumping in, I may need some help with the seperator setup later (but I really hope I don't).
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 19, 2005
#9
  • Aug 19, 2005
  • #9
I spent about 20 bucks on my separator set-up. I does catch a little bit of oil (this is on the '94).
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Aug 19, 2005
#10
  • Aug 19, 2005
  • #10
I make 9-10" at idle now with my cam after bumping my idle to 1000 rpm. My brakes aren't the best. I have a vacuum canister, but i'm too lazy to put it in since theres no room for it. I cruise at 15".
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 19, 2005
#11
  • Aug 19, 2005
  • #11
Well the pcv that the parts dude pulled at the store is different than what I had, the spring was definitely stiffer in the one I had. So, I bought the new one and will run it to work tomorrow (working OT to pay for Mustang Fuel), then recheck all the vac readings.
Thanks for all the helpful advice guys.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 19, 2005
#12
  • Aug 19, 2005
  • #12
Grn92LX said:
I make 9-10" at idle now with my cam after bumping my idle to 1000 rpm. My brakes aren't the best. I have a vacuum canister, but i'm too lazy to put it in since theres no room for it. I cruise at 15".
Click to expand...

This is great info. Thank you.

Can you provide some cam specs, to help fill in the picture for me?

Can you feel a difference in the brakes between 15" and 10"?

Thanks again.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 19, 2005
#13
  • Aug 19, 2005
  • #13
HISSIN50 said:
I spent about 20 bucks on my separator set-up. I does catch a little bit of oil (this is on the '94).
Click to expand...

Out of curiousity how did you set this up?

Does the oil drain back into the crankcase?

Or, is it a catch can that needs to be cleaned out at regular intervals?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 19, 2005
#14
  • Aug 19, 2005
  • #14
vristang said:
Out of curiousity how did you set this up?

Does the oil drain back into the crankcase?

Or, is it a catch can that needs to be cleaned out at regular intervals?
Click to expand...
I did the common route:

I used a 12 dollar air tool air/oil separator. I removed the line from the PCV valve to the upper, and put the separator in series (with new line - I used hydraulic line, but fuel line should work and fuel line is more mallable).

I used 2 barbed fittings (1/4" thread, 3/8" barbs) on the inlet and outlet of the separator. The fittings are plastic and turn 90* so my lines exit downward from the separator (it is mounted on the firewall). Simple.

I did not run a return line to return oil to the sump - I am not passing that much oil. It is an option though.

There are pics and write-ups on threads, or if you want to see mine, shoot me a PM with email and I can send pics.

Good luck.
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
697
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
J
High idle 2003 Mach 1
  • JohnnyUtah
  • Mar 29, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
274
SN95 4.6L Mustang Tech Mar 31, 2026
JohnnyUtah
J
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
680
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
610
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
491
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?